I replaced the diverter value in my shower and still cannot divert the flow of water?
-
Woodbridge Environmental Tiptophouse.com on Feb 03, 2012Sounds as though the valve was not properly installed. Did you remove the entire assembly? or just the internal workings within the diverter valve itself? If the valve did not work before you fixed it and nothing has changed sense you did the repair, I would be looking for a blockage somewhere between it and the shower head. Have you recently changed the shower head? Perhaps the gasket that used to prevent it from leaking has shifted and has blocked the water flow from entering into the shower head itself. You may want to remove the shower head and try running the water again. Does the shower head have adjustable spray? Perhaps as dumb as this may sound, Is the spray head turned off?Helpful Reply
-
-
KMS Woodworks on Feb 06, 2012Woodbridge has asked some great investigative ?...we need a bit more infoHelpful Reply
-
-
Chris J on Feb 26, 2012Thank you all for your replies, however I determine that the problem was beyond any repair that I could make. I contacted a plumber, found out that the entire assembly will have to be replaced. Yes, he also tried replacing the valve, the water did not flow through the shower head. It continued to be a steady stream through the bath tube spigot.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 27, 2012A three handle shower assembly with the common center valve being the diverter valve can always be fixed unless they messed up the threads of the seat. Then the whole faucet would need to be replaced. As all the parts with exception of the brass fixture that connects the pipes is replaceable. The seat assembly can be removed and changed, along with the entire handle assembly. Sounds as though your plumber is trying to over sell you something you do not need.Helpful Reply
-
-
KMS Woodworks on Feb 27, 2012not all seats can be removed, for minor damage they can be "faced" with a dressing tool...for the one that are not replaceable and beyond "facing" a wholesale replacement is needed.Helpful Reply
-
Related Discussions
How do I clean salt marks on my salt water pool?
My salt water pool leaves white marks all around the pool I have tried everything to remove them with no luck. Can someone please help me????
If you could redo your master bathroom, what would you change?
Dreaming of a master bathroom remodel?Tell us: If you could change just one thing, what would it be?Your input could inspire others looking for master bathroom ideas ... See more
Hardwood Floors or Carpet in Bedroom: What's Your Preference?
Hey Hometalkers! We've got a cozy debate going on here: when it comes to bedroom flooring, do you lean towards the warmth of carpet or the timeless elegance of hardwo... See more
What can I do about wood smoke coming into my house?
I need help. My back door neighbor heats with a wood stove all winter. They are downhill from me. Almost all their smoke makes its way into my house, causing headache... See more
How to find out the value of antique furniture
My husband and I are looking to sell his grandmother's dining room set but, we have no idea what to ask for it. We could not find any markings as to who made it, all ... See more
How do I fix a broken metal hanging rod in my closet
I have a broken shelf hanging rod in my closet I tried gluing And taping it and nothing worked I need help and also the shelf is slightly bent