platform bed plans
tia
-
HandyANDY - Handyman & All Repairs, LLC on Mar 06, 2012If you are familiar with simple construction it doesn't have to be a difficult project. Here is a video link to HGTV's simple easy platform bed. If you are new to DIY, I would also look into weekend classes, or see if there are any free seminars in some of the local hardware stores to get some practice or tips. Good luck! http://www.hgtv.com/video/flat-out-easy-platform-bed-video/index.htmlHelpful Reply
-
-
KMS Woodworks on Mar 06, 2012Elinor....I have built a few "bed" platforms in most cases the plywood is over kill. I build the "deck" with 2 x4 and construct it a bit like the joists in a homes floor. With spacing at 12" or so the mattress or box spring will have enough support. By using the 2 x on edge like a floor joist they do not flex. A queen size would need 2 sheets of py...so that would add 45 to 50 bucks to the project. I built a simple tallish version for our guest room king size. Here the legs are tall enough for use to use the space below for storing out camping gear in some rubbermaid "action packer" tubs.Helpful Reply
-
-
Teri Uliasz Boyungs on Mar 06, 2012Check out Ana White's blog. She has amazing tutorials as well as material checklists and blueprints.Helpful Reply
-
-
Tammie W on Mar 07, 2012I too was thinking Ana White while I was reading her question....what a GREAT bog!!!Helpful Reply
-
-
Patty S on May 23, 2012My hubby and I have built them. It is tru the plywood is more expensive, but for a novice it is the easier way to go. Make the frame about 4 to 6 inches smaller than the matress and box spring and mount the plywood overlapping the the frame so that you have full support for the mattress and box spring, this will allow you the space for your feet when you are making your bed in the morning. Dont want to stub those toes.Helpful Reply
-
Related Discussions
Turning my platform bed to a Murphy bed
I'm in need of an office space for my husband guitar instruction classes and i do not want to buy a prefabricated Murphy bed still want to use my bed frame, i love to... See more
How can I turn a waterbed frame into a platform bed?
We have a California King mattress set inside a waterbed frame. It's so hard to make the bed. Have to lift the mattress out of the frame. Can't really afford a new be... See more
Can I ask Home Depot to cut my wood?
I'm seriously considering making this twisty side table that I fell in love with here on Hometalk (By Chasing A Dream), but cutting the wood is a bit too ambitious fo... See more
What to do with our livingroom ceiling?
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
What type of hinges are used on the top of this folding table?
Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.
How would I be put on these wheels ?
I am planning on doing a mobile wood bench using 2x4. I have these wheels but have no clue to put them on