QuotaExceededError: DOM Exception 22: An attempt was made to add something to storage that exceeded the quota. http://static.criteo.net/js/ld/publishertag.js:1 in setItem http://static.criteo.net/js/ld/publishertag.js:1 in setItem http://static.criteo.net/js/ld/publishertag.js:1 in storeMetric http://static.criteo.net/js/ld/publishertag.js:1 http://static.criteo.net/js/ld/publishertag.js:1 in onload DIY Outdoor Toss Game - Golf Version | Hometalk

DIY Outdoor Toss Game - Golf Version

120,737 Views
This is a simple DIY build of a toss game that folds flat. It is a great project for a gift or something for yourself.
  • diy outdoor toss game golf version, diy, outdoor living, tools, woodworking projects
The materials are listed on our blog post, and I have also included step by step photo instructions below Step 1 is to measure and mark the boards. The common board will be used to make the legs and the braces. Measure four legs at 1" by 4" x 2', and the brace will be 2' by 3'.
Using a circular saw, cut the legs and braces from the (2) 1" x 4" by 12" boards, and the front panel from the 2' x 4' plywood board. Assemble the frame next by laying two of the legs flat, 2 feet apart. Then lay two of the braces on the top of the legs, and one 3 feet below the top. We then secured each of them with a clamp. Pre-drill each hole with a 1/8" drill bit before using the screws to avoid splitting the wood. Next, using a drill and 1 1/4"screws, secure each brace. Then do the same thing with the second set of legs and braces.
  • diy outdoor toss game golf version, diy, outdoor living, tools, woodworking projects
Step 1 is to measure and mark the boards. The common board will be used to make the legs and the braces. Measure four legs at 1" by 4" x 2', and the brace will be 2' by 3'.
Using a circular saw, cut the legs and braces from the (2) 1" x 4" by 12" boards, and the front panel from the 2' x 4' plywood board. Assemble the frame next by laying two of the legs flat, 2 feet apart. Then lay two of the braces on the top of the legs, and one 3 feet below the top. We then secured each of them with a clamp. Pre-drill each hole with a 1/8" drill bit before using the screws to avoid splitting the wood. Next, using a drill and 1 1/4"screws, secure each brace. Then do the same thing with the second set of legs and braces.
  • diy outdoor toss game golf version, diy, outdoor living, tools, woodworking projects
The next step is to create the front a panel. Looking at the 2' by 3' plywood board vertically, mark 9" from the top and 9" from the bottom. Nail a nail into the center of the bottom mark. Tie one end of a string around the nail head, and the one end around the pencil ensuring the string is 6" from nail to pencil. Next draw a circle keeping the string tight as you go around. You should now have a 12" diameter circle.
Create a circle again using the other nail, but tie the string to the pencil and make the length 4". Then draw the circle around holding the string tight. Now, you have a 8" diameter circle on the top.
Using a 1/2" drill bit, pre-drill one hold inside the edge of both circles. Using a reciprocator saw, cut both of the circles out.
  • diy outdoor toss game golf version, diy, outdoor living, tools, woodworking projects
Attach the hinges to the boards by laying both frames back to back with the plywood and braces facing outward. Using the drill, secure the hinges to the top side of each frame.
  • diy outdoor toss game golf version, diy, outdoor living, tools, woodworking projects
Here is the fully assembled project. We used paint to make it look like a golf ball sitting in the grass, and even added vinyl lettering to make our name the name of the golf ball.
  • diy outdoor toss game golf version, diy, outdoor living, tools, woodworking projects
Trying out the new project with a wiffle ball golf ball or a regular golf ball works too!
  • diy outdoor toss game golf version, diy, outdoor living, tools, woodworking projects

Materials I used for this project:

  • Plywood   (screws)
  • Common board   (hinges)

To see more: http://ourpinterestingfamily.blogspot.com/2016/06/diy-workshops-fathers-day-football-toss.html

Ask the creator about this project

  • Mary Beth
    Mary Beth
    on Jun 20, 2016

    My boys would love this!

    • Megan V (Our Pinteresting Family)
      Megan V (Our Pinteresting Family) Lutherville Timonium, MD
      on Jun 20, 2016

      Thanks! I have my two year olds using their plastic clubs trying it out. Although, they would rather toss the ball. :) It is a lot of fun.

  • Hannah V
    Hannah V Brooklyn, NY
    on Jun 20, 2016

    Reeally cool! And hello fellow Vaughan! (Yours is how everyone things mine is spelled!)

  • Maude  LaFountain
    Maude LaFountain Kopperl, TX
    on Jun 21, 2016

    Too cute now I need to try and make one

  • Singerofdreams
    Singerofdreams Rio Rancho, NM
    on Jul 3, 2016

    As added incentive to make the target, a net stapled to the back to catch the balls would keep the yard from becoming as much of a polka dot paradise or a scavenger hunt if you have bushes. I remember all the time I spent in the words of the golf course in New England hunting my father's wayward golf balls. It's not always as much fun for kids as adults may think it is. LOL

Inspired? Will you try this project? Let the author know!