Vintage Shutters Wall Sconce Diy

ScavengerChic
by ScavengerChic
8 Materials
Months ago, my younger brother showed up on my doorstep with a fantastic pile of architectural salvage stuff. A pile of shutters, a couple of doors, tons of spindles...he was cleaning out his garage and he thought I might be able to make good use of his found treasures. Junk makes me so happy and this was awesome junk!
From the pile of shutters, I have already made a headboard and mortise shelves but it was time to pull the shutters out again for project number three.
Along with the shutters I also used candle holders are from the thrift store (according to the tag on the bottom, originally from Target), a block of wood that used to be on my kids play set when they had a play set and the room divider was from my oldest son, Keith, who had found it on one of his job sites and thought I might be able to make good use of it.
The block of wood was cut into two equal pieces, I used a handheld jigsaw to free the decorative wood carving and a metal cutter to cut the candle holder away from the rest of it's decorative stand. What you don't see, is that I kept about 3 inches of the wire that the candle holder sits on so that I can just insert it into my block of wood.
The wood carving was centered and cut to the width of the wood block. It wasn't quite tall enough to take up the entire space, so a few pieces of scrap wood filled in the gap.


Before attaching, I spray painted the wood block where the carving would be attached black, so I wouldn't have to worry about staining it and it would appear to be just a shadow.
Attached the wood carving and scrap pieces to the block of wood with wood glue and a few finishing nails.


After the wood glue was dry, I sanded all the edges.


The blocks got a coat of antique wax mixed with a couple dabs of black chalk paint, painted on and wiped off.
The shutters were finally apart and ready for their paint treatment. I added yellow and blue to give the appearance of more layers of paint, but once I started sanding down the existing shutter, it probably didn't need it. There were already many layers of paint built up over the years.


I took the shutters outside and used a dust mask for the sanding.


Considering the shutters age, I wouldn't be surprised if this was a lead based paint.
This is the shutter after one layer of an antique wax.


I did want the shutter a bit darker, so after the first layer of wax was dry I applied a second coat of antique wax mixed in with a few dabs of black chalk paint. Just paint it on and rub it off until you get the effect you want.
A few screws inserted through the back hold the block of wood to the shutter and a hole drilled through the top of the block was all that was needed for the candle holder.
If you would like to see more of the step by step photos and to see a closeup of the paint treatment and it's many layers, make sure you click on the link below.


You can find my other shutter projects here. So far, I can't decide which is my favorite.


http://scavengerchic.com/2016/01/04/headboard-made-from-salvaged-shutters/


http://scavengerchic.com/2015/08/03/upcycled-mortise-and-shutter-shelves-diy/
ScavengerChic
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  2 questions
  • Donna Donna on Jun 26, 2016
    It shows you painted the shutters a blue and yellow, but the end results show what appears that the shutters were sanded down to natural wood. Did you change your mind? Either way, they are beautiful.
  • Carole Atson Carole Atson on Mar 02, 2018

    Does your brother now want his “salvage stuff” back 🤔😁😃

Comments
Join the conversation
2 of 38 comments
Next