Hometalk.com

Hi There Here's how you can get the most out of your home & garden social network: Go home
03.24.11

What size nail to use for window trim?

5 Comments Displaying 5 of 5 comments
  • Sara
    Sara Montville, NJ
    Using a nail gun?
    This comment has been reported and is under admin review.
    This comment was hidden for violating Hometalk's guidelines.
  • Imagery
    Imagery Littleton, CO
    Hi Brian,

    I use a 15 gauge 2 1/2" finish nail in an angled Senco nail gun for the area that will be fastening to the stud, and an 18

    This comment has been reported and is under admin review.
    This comment was hidden for violating Hometalk's guidelines.
  • James A
    James A Roswell, GA
    4d finishing nails
    This comment has been reported and is under admin review.
    This comment was hidden for violating Hometalk's guidelines.
  • Carl Peters Jr.
    Carl Peters Jr. Dumont, NJ
    @Brian...Depending on the size of the window trim to be installed, an 18 gauge nail should be used. Usually 1-1/4" in length works well when nailing into the jamb and 2-1/2 through the thicker part of the trim into the stud. Try to nail into a flat
    This comment has been reported and is under admin review.
    This comment was hidden for violating Hometalk's guidelines.
  • KPT Carpentry
    KPT Carpentry Wharton, NJ
    Hi Brian, If you do not have a nail gun then use # 6 finish nails make sure you set the nail and fill properly.
    This comment has been reported and is under admin review.
    This comment was hidden for violating Hometalk's guidelines.
Brian

Related Posts

Continue browsing

Join the home and garden knowledge hub. It's free & easy and only takes a second!

Feedback