DIY Concrete Garden Spheres

Simple Details
by Simple Details
$10
Easy
Knock off of Restoration Hardware's Spheres - using concrete and lighting globes from the thrift store, a bargain at $10 for five of them! See the simple how-to over at my blog:
http://simpledetailsblog.blogspot.com/2013/05/diy-restoration-hardware-garden-spheres.html
Supplies: Lighting Globes purchased from the thrift store $2 ea, and Quikrete concrete mix, $4.
Mix concrete and fill lighting globes, let stand 24 hours.
Using safety glasses and gloves, enclose the lighting globes in a heavy duty trash bag and lightly tap with a hammer loosening the glass from the concrete. Carefully dispose of the garbage bag and broken glass.
Simple Details
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 9 questions
  • Linda Elliott Linda Elliott on Sep 02, 2019

    How about heavy duty ballons something like the bouncy ones?

  • Ann Eichenberger Ann Eichenberger on Nov 30, 2019

    I purchased a couple cement rabbits at a craft show. But they broke apart when I left them in the garage over the winter. Will the product you used make it through a winter with temps below freezing? Great results!!

  • Sandy Munno Sandy Munno on Dec 18, 2019

    There is no link to this project. I cannot click link and get to project. Would like to know how to make the large concrete balls.

Comments
Join the conversation
2 of 124 comments
  • P J P J on Dec 02, 2020

    These would look great also with paint pouring. on them. Wow, I actually came up with an idea.

  • JanM JanM on Dec 05, 2022

    I’ve seen this done by covering a kids ball with a smoothed out layer of foil or painters tape over the ball, then thickly applying the Quikrete by hand. (BUT be sure to wear gloves while doing so!) Even saw them texturized by wrapping a design or criss-cross pattern with rope then covering with the concrete. Also saw the addition of glass beads or tiny mirrors they found at $Tree. These were added as the concrete was still soft but starting to set up. Came out very nicely. And yes, they did use a spray sealer to protect it after it had dried and cured.



Next