Want to build a flower box for my patio; where would I find plans on t
-
KMS Woodworks on Aug 28, 2013Building a box is pretty simple...so detailed plans are not really needed. More importantly are the material choices used to build it. Soggy dirt is very heavy and if thinner stock is used it can bow out and self destruct in a few years time. Wet soil against wood is also a quick road to failure do to rot. Lining the box with metal will help a lot in the rot dept. A flower box 5 feet long and 16" deep and 18" wide is HUGE and would weigh in at hundreds of pounds when filled with dirt. Remember that a 40 pound of potting soil is only .5 cu feet. Your dimensions would require at least 10 to 15 bags. This is 400 to 600 pounds worth. Once filled it will be near impossible to move about. Some folks will fill the lower parts of a big box with sytrofaom packing peanuts, then layer some landscape fabric over this. This greatly cuts down on the weight and soil needed. It is important though to use the old style "Styrofoam" not the newer "green" versions made from corn starch ( these dissolve in water).Helpful Reply
-
-
Betty819 on Aug 28, 2013I have a picture of what I want it to look like which came from a magazine that has the Initials as FC and date and I assume it is from Family Circle magazine about 5- 10 years ago. Only the picture and I know most outdoor flowerboxes are usually made of cecar but know that wood is very expensive. Somebody suggested douglas fir but I'm not familiar with it and don't know if it is available in our HD or Lowe's store and how expensive it is. The idea would be pressure treated wood, but it will be so heavy but at least will hold up under the elements. If I did it out of pressure treated wood, and wanted to paint it white or a color, would I need to prime it first or put a sealer on before or afterwards, then a final coat of whatever color I choose?Helpful Reply
-
-
KMS Woodworks on Aug 29, 2013Cedar is available in 3/4" thick stock as well as 1 1/2" thick ( the nominal 2 x stock). I have only seen Pressure treated available in 2 x (PT plywood is an option). PT often is quite "wet" when new and needs to dry well before it is painted this can vary from 6 months to a year based on you climate. Ideally the inside should have a metal liner.Helpful Reply
-
-
Betty819 on Aug 29, 2013I know what you mean about being "wet" as we have run into that when building our screened in porch/deck back in 1995.Helpful Reply
-
Related Discussions
Would you rather wash and fold laundry or clean the dishes?
Given the choice, would you prefer washing the dishes or doing laundry? Share your preferences and insights!
Need help picking a paint color to match my tile
The tile is gray/white with a hint of beige and looks like wood.The kitchen counters are Baltic beige and cabinets are dark wood as well
How is it really spelled?
Hi, I may be way off base, and if so, I apologize in advance, but I have heard many references to "Fir", the type of wood, with regards to kitchen walls and soffits, ... See more
Why does my oven smell when turned on?
Hi all,Lately, my oven emits an unpleasant smell whenever I turn it on. The kitchen then smells and the foul odor lingers, it's very frustrating.I'm sure I'm not alon... See more
How do I fix a broken metal hanging rod in my closet
I have a broken shelf hanging rod in my closet I tried gluing And taping it and nothing worked I need help and also the shelf is slightly bent
How to find out the value of antique furniture
My husband and I are looking to sell his grandmother's dining room set but, we have no idea what to ask for it. We could not find any markings as to who made it, all ... See more
How can I lighten my dark stained deck, or even paint parts white?
The previous owners used an oil-based, semi-transparent, dark walnut brown stain on the deck they built. I want to lighten up the area, perhaps even paint the deck c... See more