<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=996690293685739&ev=PageView&noscript=1" />
120K Views

Bi-fold Doors Turned Corner Shelf

120K Views
After moving from a house with an overloaded built-in corner china cabinet to an apartment with blank walls, and not enough of them, I needed more space for my glassware. Enter the unserviceable bi-fold doors!
A friend gave me this bi-fold door because the two slats under the center piece were broken, as was one of the top corners where the peg thingys go. But I had a vision. . . or two. The first one was to simply prop it in a corner and hang foliage down the center, especially at Christmas.
Time: 2 Days Cost: $0 Difficulty: Medium
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
(Tell 'em what you're gonna tell 'em. Or show them, I suppose, in this case.)
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
Sorry, can't find the picture of the Christmas swag with lights running down the center of this other set of doors, which is a shame because it was beautiful.
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
Okay. I have the doors. Now, what about shelf material? This whole project needed to cost me nothing. Moving, you know.
Ah! Let me see if the rough-cut, beat up 1"x12"s that I found under our old trailer will work. They appear to be wide enough.
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
Next, determine how far apart the shelves would be and knock out the slats. I couldn't break them very easily so I cut them with tin snips. (Sorry, no picture. Use your imagination. We're good at that on here.)
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
Time to make a template. Rescue a box. A few boxes, to be honest, because I had to make more than one template to get it right. Notice the trapezoid in the center, and the short end? Not going to work. Then notice the piece in the bottom right corner. That's what the back side needed to look like.

Well, if I had followed the instructions on the picture I saw a while back it would have worked. Alas, I didn't have those instructions when this project was in the works. (Link to that is in my blog post. I'm too lazy to look it up and link it here.)
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
As you can see by the black tape, I had to do a little revamping. I was running out of large enough pieces of cardboard, so a little black tape had to work.
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
Once I got the template to fit on the shelf, I drew two of them on the board.
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
Nice $30 saw yes? This project is the first time I used it, and it was a bit intimidating.
I cut out one shelf and checked it before cutting the other three. Good thing, because it needed a little bit of tweaking.
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
Looking good! Now to make a top shelf.
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
Hey, the paper will never been seen, and even if it was, its 'character', right??
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
I wanted the shelf to be collapsible, so the shelves are only sitting in the slots. The top is held in place by some leftover screws that are dropped through a hole in the shelf. You know those holes at the top of the doors where the pegs go in to slide on the track? Well, I got lucky and drilled the holes in the front corners of the shelf exactly there!
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
The pieces broken out below the center will be hidden by a chair.
  • bi fold doors turned corner shelf, doors, how to, organizing, repurposing upcycling, shelving ideas, woodworking projects
And there you have it! A free shelf. Not anywhere near enough space for all my amber glassware, but every little bit helps.
At first I didn't think there was enough contrast between the shelf and the glass, but now I like it. Much less busy this way.
The price, were you to buy all the pieces... I don't have any idea. For myself, I had everything on hand.
It took two days to make it because the template frustrated me. Minus that, this would be an afternoon project for someone who knows what they're doing. Oh yeah. That's why it took me two days!!
There might be more info on the blog, I don't know. It's 1AM and I'm not going to read it to see! Go check it out.

Materials I used for this project:

  • 30" bi-fold door
  • 1"x12"
  • Cardboard large enough to make a template
See all materials

To see more: http://itsomuchfunwatchingod.blogspot.com/2016/08/bi-fold-doorshutter-shelf.html

Got a question about this project?

Inspired? Will you try this project? Let the author know!