DIY Pallet Christmas Tree + Tutorial

Christmas 05.19.16
These Christmas pallet trees are a quick and simple way to dress up your front porch for the holidays. Add lights or ornaments to make your tree more festive.
Time: 2 Hours Difficulty: Easy
DIY Pallet Christmas Tree
Cut your boards to desired length. Mine where cut at 19.5", 17",14.5 ", 12", 9.5", 7", and 4.5".
Lay your boards out and cut another board for the "trunk".
After painting the boards, lay the "trunk" down on the boards to get the spacing you want.
Pre drill holes and screw the boards to the "trunk". Use 2 screws per board.
To make your base, cut (2) 3.5" boards and (1) 10" board. Use a Kreg jig to make pocket holes in the 3.5" boards. .Screw your 3.5" to the sides of the 10" boards.
Attach the base to your "trunk" with brad nails. Enjoy!

To see more: http://www.fortledbetter.com/diy-pallet-christmas-tree-tutorial/


  • Robin
    Robin Bushnell, FL
    So cute for front porch!!!!
  • Robin
    Robin Bushnell, FL
    So cute for front porch! I love it.
  • Tess Borgra
    Tess Borgra O Fallon, MO
    My son literally took a sledgehammer to a pallet I've been saving. I didn't know what to do until your post. Still needs paint but this is the perfect solution!
  • Kat Ja
    Made this one a few years ago and still love it!!
  • Rachelmary
    Rachelmary Warwick, RI
    Could use this in a room , lots and lots of ideas for one of these trees, so simple , but!
Fort Ledbetter
Feedback