Does anyone know how to take the strips off of trailer walls?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Command strips: why do they pull the paint off when I remove them?
Best wall primer to make paint last!Avoid peeling wall paint with this acrylic wall primer that Amazon reviewers swear by!
How to remove 'fake' command strips from walls?
These are not Command strips, but similar. Two are on a wall & one is on a maple door. How can I remove them without tearing up the wall/door? Thanks!
The strips cover the seams of the wall panels. Use gloves and eye protection. To remove them, use a box knife and carefully score both sides of the strips to break the seal against the wall. Take a putty knife, slip it behind the strips and wall (you may need a hammer), and gently pry the strips the strips off. Watch out for nails. To seal the joints use fiberglass mesh drywall tape on the joints ( its sticky). Put on drywall patching compound over the tape and joint. Try to get a smooth coat on. Let it dry overnight. Next day lightly sand to smooth and feather out the joint with the wall. Patch any ridges or low spots. Let that dry. Then sand to smooth out.
Good answer above...I have never had an issue taking them off...they pretty much just pop up with a 7 way or putty knife....particle board/paper crap