Help!! I pored a glaze coat on my table & there's separated spots....!

Randy
by Randy
I pored a glaze coat on a table and there is alot separated spots help! I used FAMOWOOD glaze coat. the glaze actually separated from the surface and left several blank spots. How do I fix it.
  2 answers
  • Hillela G. Hillela G. on Apr 10, 2017

    Oh no!! I think this'll help you out- good luck!

  • Bernadette Staal Bernadette Staal on Apr 11, 2017

    I have to admit I have not heard of the product you used but I would suggest sanding down the surface until you are back to bare wood and then reapply. Note: if you have applied it to a veneer then your depth of sanding is very very small so you will need to study the layer of the wood before taking any action with your sand paper. Hopefully it is solid.