How can I fix- my bedroom furniture looks dull!

Apply paste wax with a soft cloth and rub it into the pores of the wood using a tight, circular motion. Paste wax is easy to apply, and is an effective treatment since it can be worked deep into the wood. Once it penetrates the wood, it hardens to form a protective seal much like an automotive wax.

After applying the wax and rubbing it into the wood, allow it to begin to dry. After about five minutes, use a clean, dry rag to buff the finish. Buff in the direction of the grain (Image 2) to remove excess wax and create a low-luster sheen. This results in a subtle finish that is appropriate for an antique -- rather than a shiny, high-gloss.

If your furniture is wood, try using Murphy's Oil Soap to remove any polish buildup, residue, etc. Just follow the instructions and it should help tremendously. After cleaning, allow it to dry completely and then use the recommended polish for your furniture type for best results and less build up in the future.

I found this tip years ago and it never fails me. Using a soft cloth and a spray of 1/2 vinegar and 1/2 water (or just mix these in a bucket or pail). Wipe all of your furniture. This combination will remove all of the residue and "gummy, tacky coating." When you have completed the cleaning, use a recommended polish or wax to brighten the finish.