Red Pots: 27" Walmart

Lanterns: Misc stores (all were under $20 - Home Goods, Pier One, Garden Ridge)

You can learn more details about how I transformed the space from my blog.

http://www.hometalk.com/1327861/up-cycled-ti... Thanks Tamara :)

Microwave safe bowl ( I used a large glass measuring cup)

Sponge

Paper towels

1/4 cup of distilled white vinegar

1 cup of water

http://athomewithmechristine.blogspot.com/

http://www.facebook.com/athomewithmechristi...

The yellow, blue, and gray accents are calming yet energizing and it's great to have a fun space to call my own.

printer, sheets of inkjet fabric and a self-adhesive lampshade. I bought the fabric and lampshades at Michaels, but you should have no problem finding the materials online. For a detailed tutorial, head over to Completely Coastal:

the attic out of ourhomes during the summer. During the winter the issue flips a 180° for those upnorth who want to keep the heat out of the attic & stop a major cause ofice dams. The nice thing about an insulated attic hatch is it performs bothfunctions quite well & helps one #KeepCozy. Besides the materials below allyou need is a tape measure, a utility knife or saw, and a caulk gun.

For this attic hatch you need:

2" thick foam-board (4×8 sheet) with an R-Value of 10 orgreater (you might need two sheets for larger hatches or to make it thicker)

8 -20' foamweather stripping (the wider the better)

1 can Great Stuff® foam or similar

1 tube Liquid Nail® or other construction adhesive

Misc. hardware & 2 small bungee cords to seal ittight

Getting started – depending on your region & insulationlevels you need to rip the side pieces at 11". For our friends up north thatrequire an R49 in the attic it should be ripped at 15". Make sure you leave thefactory edges for the lid to sit on. Move any insulation in the way gently outof the way & place the side pieces in place.

Attaching the pieces – The end pieces should span the sidepieces unless you are doubling up the foam. Apply Liquid Nail to where thepieces will meet & put them in place. I simply used some 16 penny nailsinserted through the side to help hold everything in place while the glue set. Oncethese panels were in place, I foamed up all the seams any cracks and theadjoining areas. Not only does this stop air leakage but also helps keep everythingin place. On top of this, simply add some self-stick foam insulation to helpensure any imperfections don't allow air-leaks.

The Lid – the lid overlaps the side assembly by about aninch which means you don't have to fidget with it trying to get it justperfect. To help hold it in place, I just used some eye hooks – 2 short ones toattach into the wood & two longer ones for the lid. I also added 2 differentsize washers (a small one that would prevent a larger 1 ½" washer from slippingpast the nut) & some nuts to attach to the lid. Then I simply used a smallbungee cord to help hold the lid down.

A few other quick notes – If you do not wish to create yourown, you might want to check out Battic Door which makes a great product withan R-Value of R50. One other option is foam board with Radiant barrier alreadyintegrated into it – if you go that route it should be facing in towards the interiorof the house for best results. To see the original article with a few more tips& links: http://blog.sls-construction.com/2011/air-se...

ago. I want to try it more for technique than for anything else.

I'm in love with the Annie Sloan Chalk Paint and Miss Mustard Seed paint effects. I'd love something like that, with wear spots. I'm not about brand new or matchy-matchy.

Our decorating style would best be described as vintage-rustic, I suppose. We love old things, but place the most value on items that are sentimental (i.e., passed down within the family as opposed to priceless & delicate antiques). We like to live in our home, if that makes sense. :-)