Image Transfer Using Dixie Belle Paint

2 Materials
$20
25 Minutes
Easy
Transform a simple block of wood into a sweet piece of art with this simple image transfer technique using Dixie Belle Clear Coat.
Start by cutting a piece of wood to the size you want, then sand any rough edges. The wood used for this project was a 2 x 4 cut to be a square. Stain the wood and allow to dry.
Paint the side of the block where the image will go in the color of your choice. Keep in mind that this will not be the main color of the block.
To add texture and an aged look, randomly add 2 more colors of paint to the block. Let dry.
Paint over the colors already added to the block with a fourth color. Let dry.
Sand the block to expose the other colors. Print an image. Cut around the image. You will need to use a laser printer for this project. If using an ink jet printer, the colors in the image will bleed. If you have an ink jet printer, print out the image then take it to an office supply store and make copies.
Coat the ink side of the image with Dixie Belle Paint Company Clear Coat.
Place the image ink and clear coat side down. Allow to dry completely. It is best to step away for a couple of hours.
Spray the image with water to saturate the paper.


Gently start rubbing away the paper. If the image looks milky when dry, spray with more water and continue to rub away the paper. If some of the image rubs off, it just adds to the aged charm of your art piece.
Suggested materials:
  • Dixie Belle Paint
  • Dixie Belle Clear Coat
Dixie Belle Paint Company
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  2 questions
  • Susan Susan on Aug 19, 2017

    Can this be done on slick surface like kitchen cabinets or glass?

  • Marlene Lerner-Bigley Marlene Lerner-Bigley on Aug 19, 2017

    We, in the West, do not get Dixie Belle paint products so would Mod Podge be okay to use for clear coat?

Comments
Join the conversation
3 of 27 comments
Next