Why is the finish on the top of my antique desk sticky

Sara
by Sara
  6 answers
  • Janet Pizaro Janet Pizaro on Aug 29, 2017

    what was the process used to refinish the desk

  • Probably just needs a good cleaning. If it is wood, I would give it a wash with Murphy's Oil Soap.

  • Bar29112504 Bar29112504 on Aug 29, 2017

    Could be previous owner smoked causing nicotine to get into the finish. Be careful when you clean it and not rub too hard. I've seen the finish come off on the rag. I love the Murphy's Oil Soap. You may want to Google and find a good antique collector and ask their advice.

  • It could be the old finish is reacting to some oily polish that has been used on it.. You may have to strip it...

  • Lynn Goins Lynn Goins on Aug 29, 2017

    Sometimes old varnish gets soft. I would try cleaning it with white vinegar and water. If it takes the old finish off, the old finish was not in very good condition and needed to come off.


  • JAMES A ROLLI JAMES A ROLLI on Aug 30, 2017

    GET TRIPLE ZERO STEEL WOOL GO WITH THE GRAIN OF WOOD IF POSSIBLE START OFF LIGHTLY AND WASH OFF WITH A DAMP RAG TO REMOVE FIBERS FROM STEEL WOOL.OR MAKE A SOLUTION OF BAKING SODA AND 1/4 CUP OF VINGER AND WATER MUST BE WARM BUT NOT HOT OR YOU COULD USE PAINT AND VARISH STRIPPER YOUR CHOICE WEAR GLOVES AND A PAPER MASK