Can u give me the material for coffee table ?
by
Kim
+5
I need to know material used for coffee table
Can u give me materials used to make ? Thank you
8 answers
-
Looks like it could be refurbished pallet wood.
SlickandPeggy
on Mar 05, 2014
-
Yep looks like pallet wood :-)
Jobou19
on Mar 05, 2014
-
It looks too sturdy to be pallet wood. It could be pine - maybe 2 x 6's on the top, but it's hard to tell the dimensions of the wood in the pic.
Chris
on Mar 05, 2014
-
I agree with Chris and think it is pine, probably yellow pine from the knots in it that has an oil finish. The top looks like 2 X 6, the legs are 2 X 4.
Norman Ransom
on Mar 05, 2014
-
go to this link. has material and directions. http://ana-white.com/2012/07/plans/rustic-x-coffee-table
Diane
on Mar 05, 2014
-
Looks like pine to me.
Jodi
on Mar 05, 2014
-
Cut List..This is on my bucket list ..I downloaded blueprint and instructions with pic by pic...so far, it has been 2 years, but still hanging on to it:) Cut List: 4 – 2x4 @ 16 ½” (legs) 4 – 2x2 @ 41” (side trim) 4 – 2x4 @ 22 ½” (end trim) 2 – 1x12 @ 41” (bottom shelf) 2 – 2x2 @ 22 ½” (both ends cut at 60 degrees off square, long point to short point, ends are parallel) 4 – 2x2 @ 11 ¼” (long point to short point, one end cut at 60 degrees off square, other end cut at 30 degrees off square, ends are not parallel but are cut in same direction) 5 – 2x6 @ 52” (tabletop boards)
Linda Murphy
on Mar 05, 2014
-
It is pine. Can tell from the knots in the wood.
Irish53
on Mar 06, 2014
Sign Up to Answer
