Info on sanding and staining stair railings
by
Val27651932
+2
Had wood floors installed upstairs. Need to sand and stain stairs and railings to match. Need guidance before I begin. Thank you :)
https://www.angieslist.com/articles/how-refinish-indoor-stair-railings.htm
This is a very big job. Sand down the wood, apply the stain (2-3 coats), then use a poly sealer topcoat. You might consider painting the spindles white as well as the front part of the stairs, just staining the rails and tops of the stairs for a classic look and it will be easier to paint the spindles vs. sanding and staining them. Here is an example of what I am referring to.
Cindy is right, this is a huge job. Do what she says if you don't enjoy a big mess for a long time.
Plus, you won't be able to go up and down the stairs unless you just do the right side then the left.
https://www.makeit-loveit.com/how-to-stainpaint-an-oak-banister-the-shortcut-method-no-sanding-needed/
I've never used gel stain, but have read lots of posts about using it to redo cabinets and trim. Worth a read.
There is a post in this Home Talk. check it out! A lady strips and re stains her staircase @ paints the railings white. Her instructions are easey to follow, plus she shows pics with every step. It is different, but nice. Good luck Kay Adelaide Australia