Hv u ever flipped your panelling around & painted it? does it work?

Lo
by Lo
i have heard thru the grape vine panelling is hard to paint, someone said if u turn it around it paints just like wood. i'm trying to find money saving idea's for my tired old trailer.
  13 answers
  • Ellen Burton Ellen Burton on Mar 29, 2014
    I'd like to know too. We just bought a house that is full of the stuff and I just don't like the painted look of it.
  • You will still have to prepare, prime, and paint the opposite side as well. If you buy a bonding primer or primer made for glossy surfaces, you will need to just thoroughly clean the paneling (some use TSP) and then put 2 -3 light coats of primer. Paint with any paint and on paneling use an eggshell or flat or even a satin. do not use glossy. Painted paneling in an antique white or even white can look very clean and brighten up your room! another option, which will take time, would be to fill in the paneling by mudding (or using a light joint compound) and then sanding for a smooth finish. to shorten this process you could keep the paneling on the bottom, paint it, and put a chair rail up and then texturize or smooth finish the upper area. There are options but some take time and patience. good luck
    • See 1 previous
    • Lisa Lisa on Apr 20, 2014
      @Barbara R I agree, that is how I painted my paneling and it looks great and washes easily!
  • Also, if the paneling is glued up you may have difficulty removing the glue. Lots of sanding.
  • Tammy Slavin Tammy Slavin on Mar 29, 2014
    We bought our house 3 years ago . Lots of paneling. I have painted most of it . Just make sure you have lots of paint on roller so it gets in the grooves . No need to turn it around.
  • Liz Holland Liz Holland on Mar 29, 2014
    I painted my daughters old room, full of old paneling. Make sure you clean and prime it with a good primer, then use lots of paint! I didn't turn it around either.
  • Lo Lo on Mar 29, 2014
    thanx everyone, think i'm going to see if we can paint without turning it around. clean it real good with tsp then prime then paint.does anyone recommend soup and water then tsp, or is that over kill?. Asking because the place is on a farm and theres always lots of dust and dirt around.
    • @Lo A good cleaner will do. I would use 2 light coats of primer. I find better adhesion that way. Zinsser is a good primer and ,make sure it says for glossy surfaces. Wait about a couple hours after dry to touch. (this has always worked for me) to do grooves you have a couple choices but I would use a brush to do grooves and then use a good roller on top of that. You do not want to have runs or splatters. I switched a long time ago to the 6" rollers and they are so much easier to use with my achy wrists and arms. Also invest in a good brush to the corners and edges. Good luck!
  • Barbara R Barbara R on Mar 29, 2014
    From what I know, if you remove paneling, you will have a horrible mess! Some are backed by plasterboard (push on it and see if it gives)...then it is glued, you don't want that loose plaster anywhere. If it gives when you push on it, there is nothing behind it and it's nailed or screwed. Most is old (1960's or older) warped from the humidity, etc..anyways, a big mess. If you want to take some plaster or spackle and texturize it before you paint, go ahead. You an also wallpaper it with a heavy paper to hide the lines. Myself, I painted mine (primer first always) and I like it a lot!
  • Dee Dee on Mar 31, 2014
    I painted the paneling in two bedrooms, and I actually like the look-kind of a beachy/cottage feel. Just cleaned, primed once and painted with 2 coats. Very easy.
  • Jason Jason on Apr 01, 2014
    It wouldn't hurt to sand it a bit too, always want to give the surface "tooth". zinsser bin primer is the best way to seal it if you think any stain will bleed through. I swear by oil based primers, they soak in and grab better. sherwin williams duration paint is very good strong stuff, if its in the budget. Going over it with the thin drywall is always an option as well.
  • Carla Jones Carla Jones on Apr 03, 2014
    yes we did and turned it around..we also stained it. looks good
  • Trey LaParque Trey LaParque on Apr 15, 2014
    Im currently working on remodling my moms mobile hm. Heres what I did to the panel wall...It can actually hold nails now! Torn down fence, some polyurethane caulk and a little time=NO more wood paneling!!
  • Lisa Lisa on Apr 20, 2014
    That looks awesome! I want to do that in my home, great job!
    • Trey LaParque Trey LaParque on Apr 23, 2014
      @Lisa Thank you, Lisa!!! It was really pretty easy,i used our OLD fence panels prepping boards was just a lil time consuming but summer sun is here so that'll get things dry ALOT faster than washing boards in freezing middle of the night weather....I dont recommend that....I can run down the process I took if you would like. I'd say total cost was $20-$30
  • Candye Candye on Oct 22, 2016
    Panelling is super easy to paint.! Just like anything else. The lines do give it a "cottage-y" feel. I love it. Now if I can talk my husband in to letting me do the whole house and get rid of all the dark panelling.!!