Glaze | Stain | Antiquing Technique

When I’ve got to fake a patina on a painted surface, I use any variation of these 3 things:*oil-based stain*oil-based glaze*dirt (no, really.)
In my example pictured below, I wanted to add some really dark stain around the detail pieces.
I concentrated on areas I felt would “collect” the most patina over time.
This next picture shows using stain to create a “shadow” from an add-on piece.
And because anything metal seems to “bleed” into the wood over time, I did this:
I use a small brush to smear glaze into all the corners and crevices.
I have found that I get a better result if I over-apply, and wipe off.


Also, if I feel like not enough glaze wiped off, I wipe with a mineral spirits soaked rag.
Over-application, then wiping, will ensure that all the little details and crevices get filled with glaze.


When glazing a surface that’s textured, (like my example in the pictures) it’s good to apply/wipe in all directions too.
I cover every bit of surface with the glaze.
MyAlteredState
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
4 of 8 comments
  • CK CK on Sep 22, 2014
    I do something quite similar but using latex. I paint (light color), then glaze (darker color), wipe off excess. If necessary for a more aged appearance I then dry brush on another light color. Here's an example of that easy 3-step process I just did on a chair. It a little less aged appearance that works for certain pieces.
    • See 1 previous
    • CK CK on Sep 23, 2014
      @MyAlteredState Thank you. I love how your pieces come out with your technique, especially for a more aged antique look. :-)
  • Candy Walsh Candy Walsh on Jan 13, 2017
    Gorgeous!
Next