Plymouth Porch Remodel
Porch Remodel Plymouth,Mass
View of jack sruds under new beam
New double 1 3/4" x 16" LVL beam
Opening after header was shortened up
Interior view with new LVL beam in place even saved the interior sheetrock
Two 1 3/4" x 16" LVL beams in place and ready to rock and roll
2 x6 foloor framing
Right side existing framing
Opening with slider removed will be raised up to match two new 1 3/4" x 16' LVL beams to be installed
2x6 floor framing over existing 2x10 existing deck framing
exist opening with windows and slider removed will be removing existing framing and header to install two 1 3/4" x 16" LVL's
Existing framing and insulation
Left side existing framing
Existing slider and windows
Existing storm panels and door which will be removed
These are so outa here
Roof trusses above new porch remodel
You see those 2x's leaning back towards the the header over the interior windows and slider that is load bearing is why where installing 16" LVL's
Oh ya in the attic checking out the framing always a good idea to make
sure what type of load you are carring
Dining area interior walls
Interior view where wallis to be opened up
Interior view of windows and slider
Interior existing wall
Second Slider which went home with me
And I already have a home for this slider
Comments
Join the conversation
2 of 5 comments
-
That is going to be a very nice addition.
-
Existing closed in porch which we will be turning into living space removing existing storm door and aluminum panels framing new wall lto accept two existing windows and slider which are on the interior wall opening up interior wall to approx 13'-6" which we will be installing two 1 3/4 x 16" LVL'S to carry the load framing new floor to be level with existing sub floor and installing new hardwood flooring to match existing
Frequently asked questions
Have a question about this project?