My kitchen sink faucet is dripping
by
Anita forget
+1
Is it very hard to replace the washer?
4 answers
-
@anita forget It is not difficult to replace a washer. You just unscrew the lowest connection - sorry my terminology is not professional - but usually there is a piece at the bottom of the faucet where the water comes out that unscrews and the washer is inside that. You need to have the right size washer and then replace, screw back on and voila it is done. Hope this helps - you can always go to a home depot or lowes or even a Canadian Tire for more advice or to get a better picture. Do up date us on the results of your diy project.
Gail Salminen
on Feb 04, 2015
-
Some faucets do not have washers, but do have a kind of cartridge unit you can buy at Home Depot. I learned this by googling noisey leaky faucet. saw a youtube video on how to replace it.
Marion Tinney
on Feb 05, 2015
-
First shut off the water supply line. Depending on the type of faucet you have, some have cartridges in them with more than one washer. If you google it you will probably find a utube showing how to do it.
Cjzoldjunk
on Feb 05, 2015
-
Shut off the water first, whatever you do.
Liliana Wells
on Feb 05, 2015
Sign Up to Answer
Related Discussions
Suggested Project Book
