White haze on antique wood

Question

I cleaned my antique wood radio cabinet with rubbing alcohol due to an 'experts' advice and now have a white haze on the finish.  How do I fix this?

Funnygirl · Answer

How about a little mayonnaise?would try it in a small spot,it might work!

Sherrie · Answer

Did they tell you rubbing alcohol or denatured alcohol?

Kristi Achord-Neucere · Answer

I'm not sure what expert lol said rubbing alcohol.... Should have been denatured alcohol. And rubbing alcohol wouldn't hurt unfinished wood......well, bc it has no finish. It's plan wood without a finish to harm. When you used it on finish furniture you broke down the molecules in the chemical used to protect and seal it. Which is normal clear but bc the bonding in the molecules has been broken.... Its caused a haze. Easiest was to fix that is gonna be to try and sand lightly over it and then reapply your top coat. Probably more than 1 coat will be needed. But it is very easy to fix.

Denise King · Answer

I was hoping not to have to sand it.  I'm afraid I might lose the original colors.  The piece is a very old radio cabinet with multiple colors of stains, not veneer.  I hoping not to lose it.  I was trying to restore it to the vibrant colors before sealing it because the protective finish is long gone.

Vicki Gay · Answer

Maybe try a hair dryer - I tried this on a blotch and surprisingly it worked - use the low setting move slowly and don't rush it .

Kathy Meador Wells · Answer

Try using some kind of furniture oil on the whole piece to make sure you don't have color differences.

Kristi Achord-Neucere · Answer

Putting heat on the haze would be a great idea..... Except this isn't a water ring, or it being hazed bc of being wet. Unfortunately this haze is not do to being wet or damp. This haze is due to the break down in the moluclues of the clear coat. Think of it like this.... If you paint your finger nails and follow it with a clear top coat. You decided to 'clean' your nails and (for whatever reason lol) used acetone instead of soap. When you wipe the acetone on..... What is it gonna do to that top coat? How do you fix it? Not with oil or heat.

Jill · Answer

Actually, I think you can try wiping it down with the denatured alcohol, which you should have done the first time. It should take the haze out of the color without damaging it. I have used it before on furniture that the finished was hazy, and it cleared it up. But do yourself a favor, and test it in a inconspicuous place first where no one will notice if it doesn't work. And whatever you do, do not rub, just simply wipe.

Denise King · Answer

Thank you, I did test a spot on the piece that the rubbing alcohol I was told to use did not haze.  The front of the piece was just more delicate then the out of site spot.  So far Kristi's trick has helped, and made the wood silky smooth as an added bonus.

Cindy · Answer

Try Murphys Oil soap.

Doris Jean Miller · Answer

This product works every time. The Victorian House Finish Rejuvenator. I discovered it years ago when my grandson decided to clean my wood with scrubbing bubbles. It turned the finish white and streaky. I saw this product at the home and garden show and of course didn't buy it and found them again after a long search because that was BEFORE Google. lol Any way you can read about it on their website now. Its made in Oklahoma. www.thevictorianhouseproducts.com

White haze on antique wood

Suggested Project Book

15 Inexpensive Tricks To Help You Landscape (Without Stressing Out!)

Other

More

White haze on antique wood

Suggested Project Book