We considered replacing the mirror altogether, but decided to go the less expensive route first and see how long it would buy us.

*Questions and unexpected events that arose during the project:

I didn't know how well the mirror was attached to the wall. I also didn't know how well my adhesive would adhere to the mirror and trim.

* Cost Comments:

1"x4" MDF (32 ft) - $20

1/2 birch plywd - $15

Trim (40 ft) - $20

Crown (3 ft) - $4.50

Lights - $60

*My motivation to do this project:

The mirror was large and an eye sore. We wanted something a little nicer.

*Project Steps:

The first step was to replace the single light fixture with matching twin ones. I ran the wiring, secured the boxes and mounted the new lights. This was required due to the shelving unit. I then measured out the surface and determined the size of the shelving unit. Then I purchased the materials and started designing as I cut. The shelving unit was assembled and attached first. It was ~2 inches higher than the mirror and secured to a stud to help support the mirror against the wall. The trim and molding was measured, cut and secured using GOOP adhesive and tape to hold in place until it was dry.

Advice:

Don't assume the mirror is attached to the wall well enough to hold the additional weight. Make sure it is supported fully.

Do measure twice and cut once.

Materials:

Wood, MDF, Trim - $0.00

Light fixtures - $0.00

as you watch birds and butterflies flock to it. Since these fountains are smaller, you can tuck them almost anywhere in your garden. Add them to a spot near your front door to greet your guests! For information on where to buy, visit http://www.aquascapeinc.com/shop-online.

#SummerStyle

soaking Camellia seeds prior to planting. Once planted he will continue to feed 100% natural nutrients to condition the soil. This allows the plants root system to absorb the nutrients needed to stimulate strong healthy root growth.

The second photo is a "side by side" seedlings on the left were sown and fed water and on the seedlings on the right were hydrated in Authentic Haven Brand Natural Brew prior to planting and then fed 100% natural nutrients. As you can see the seedlings on the right are heartier with fuller growth. read more http://www.manuretea.com

only has the germination rate been excellent, but the carrots grow at set distances apart so there's no need for thinning the seedlings.

There's several options-I like using toilet paper, flour, and water. I've provided more information below and on my blog.

(a pallet that was someone's trash)! See my step-by-step tutorial. A pallet vertical garden is an inexpensive way to create a lovely and unique focal point for your outdoor space and you don't need a lot of stuff to make one.

tutorial on the Empress of Dirt site listed below.

Don't be afraid - it's a simple, slow process that takes a gentle touch, and once you know how to do this, you can make all sorts of other garden art projects as well.

It is also possible to make these just using silicone sealant as the adhesive but I prefer drilling holes and using wires to make it last through Canadian winters.