after shots. The prep work is sanding the surfaces to make the mastic stick. Lay out your pattern first and cut all tile and re fit to where they will be placed on the cabinet. Set the tile with mastic let dry for a few days. Continue by putting the grout in the cracks.Let stand for 20 minutes and wipe with a sponge,then with a soft towel to remove all the residue. After 48 hours seal with sealer. I still need to finish the wall behind the stove with tile.

half old and I needed a pop of color. So I went online for a solution and I found several DIY for renter's backsplash. Saw the pictures and read the instructions and set off to find the following supplies: Table Placemats, and way to hold them in place, which I chose doublesided tape so it would be easy to remove without damaging the walls and a pair scissors. Since my kitchen is a small area I purchased 10 Benson Mills Bamboo Placement for a $1.00 each from Big Lots(I only used 8). Proceeded to apply double sided tape to placemats (make sure walls are clean) and put the mats in place on the wall. Here is my finished product. There was 1 inch gap between the cabinets. So I filled in the space with a cut down(cut to fit) version of the placemat. So far its working......

Toilets only come in 12 inch and 10 inch standard rough ins.

We had 11.25 inch rough in. However....

(Cost is based on toilet plus plumber.)

Read more here:

http://www.soulstyle.ca/sophies-kitchen-reno...