brunnera, carpet bugle, epimedium and bishop's weed are doing well there, but I'm looking for more. I was happy to recently discover HGTVGardens.com and their plant finder tool which is easy to use and has specific information on which plants will do best in whatever conditions I enter. (Of course there's lots of other things on the site like tips, landscape ideas and photos from gardeners all over the country, in addition to a whole farm-to-table section! But oh, man, is the plant finder tool fun!)

And I found three new plants for dry shade to look for: foamflower, saxifrage, and wild petunia. Now, I just have to find where to buy them!

#spon

already have, the right tool for the job will save you time, effort and backaches. Here are 6 valuable garden tools that you won't want to do without.

or do I use a reg. drill and special bit? Should I drill from the unglazed inside to out or vice versa? They are pre-drilled for attaching.

unpainted furniture that I haven't gotten around to painting yet, and this dresser was the perfect fit for a tool chest.

We removed the bottom drawers and dividers and replaced them with two doors. This gives a larger space to store our bigger tools and still keeps them hidden away. After all the building portion was done, I gave it a fresh coat of paint and updated the door and drawer pulls. #BeforeandAfter

masonry. Instead, invest in a more heavy-duty drill with a hammer feature. This allows the drill bit to break up the masonry.

You will also need to purchase a masonry drill bit. These bits have harder cutting tips made of tougher materials than their standard counterparts. The tips of masonry bits are also shaped differently, more like an arrow, than other drill bits. You can also tell that you are using a masonry bit because the tip will be slightly larger than the rest of the bit. You will also need a screwdriver bit, plastic anchors and safety glasses.

It is also important to consider where in your wall you will drill. There are two options when drilling into a brick wall: either directly into the brick itself or into the mortar between bricks. We recommend drilling into the mortar instead of the brick for a few reasons. Drilling directly into brick is more difficult than drilling into mortar and runs the risk of damaging the brick. It is also easier to repair mortar if you drill into the wrong location or decide to remove your decorative item.

Use a marker to make a point on the mortar indicating where you need to drill. This will depend on the object you are hanging. Using your masonry bit, start to drill into the mortar. Go slowly. Drilling too quickly may lead to an unnecessary mistake or may cause the bit to overheat.

Once you have drilled your hole, insert your plastic anchor. You should be able to slide them in with your hand or tap them in gently with a hammer. Once your anchor is in place, remove your masonry bit and replace it with the screwdriver bit. Drill a screw into the anchor as you would into an interior wall, ensuring you leave enough of the screw exposed to hang your object. As you screw into the plastic anchor, the anchor will expand and grab onto the edges of the masonry. This ensures your object will be hung securely.