Old picture frames made into wall plant hangers
take a old picture frame ,add a wooden box inside ,varnish all the pieces, hang on wall with cleats and enjoy
2 of 5 comments
Container gardening has become increasingly popular in recent years, and with good reason: it is cost-effective, water-wise, space efficient and super easy! Plants, and especially veggies, are happy to grow in pretty much anything, whether it’s a bucket or a bag. You really don’t need a lot of space for it either. As long as you have a sunny spot, you can grow something. Let’s take you through the steps to setting up your own small garden.
I really like to burn rubber, so pretty much all the tread on two of my tires was gone - it was time for new tires for my little red SUV. We ended up replacing all four tires, and we tossed the two really bad ones, but for some reason decided to hang onto the two that weren't that bad. The hubs and I were cleaning out the garage the other day and saw the two tires stashed in the corner. My husband was ready to take these two beauts to the dump, when I had a vision - a vision that became a reality this past weekend. I used an old tire, an old rim and some left over plywood to make this one of a kind garden planter. Let me share with you how I did it! I started of by giving the outer edges of the rim a fresh coat of black paint. I used just regular flat black spray paint for this. I didn't worry about doing the inside or bottom because this part is not seen.
(This post was written in collaboration with Gardener’s Supply but all thoughts and opinions are my own.)Does the idea of digging out turf and dirt keep you from starting a garden? Me too! But I’ve got a method that will save time and your back. Learn how to start a garden the easy way with these tips.I’ve never mentioned this before, but several of our garden beds were started with the no-dig method to starting a garden.Have you ever heard of it before?It makes starting a new garden so much easier and you can do it for little to no cost, depending on the materials used.
If you are like me and you like to eat outdoor rather than indoor. It doesn’t matter if you are just having your breakfast alone with the songbirds or a big family gathering. It’s always better outside. But, i found my round 4 chairs faux wicker table quite annoying. It’s small and not my style. For that, we thought about something built from scratch. That way we decided on the style, the size, the color and the BUDGET. The one we want is an 8 to 10 chairs capacity depending of the size of chairs. it’s exactly eight feet long, 42 inches wide and 28 inches high.If you have a small knowledge in working with wood this project is for you. Also if you are used to use the following tools the work gonna be much easier for you. You will use the miter saw, the kreg jig and the drill. We really didn’t use any extraordinary technique or tools to build it.I was inspired by the pottery and barns farmhouse table design. It has a beautiful X brass legs and along board as a table top we added a thin frame all around to bring everything together. For the table top boards we bought a specific wood boards that facilitate the assembly. They can go into each other without leaving any gap. I know how frustrating to get those beautiful X legs done and all the required tools and techniques. Here we did a little trick to have it done. Clever husband hhhh.the general cost of this table is 210 dollars. Did I Said 210$? Yes, that Includes wood boards, screws, stain and protection formula. A judge table like this will cost not less then 800$ from any store. So you are saving a lot here.
This is a very easy way to flip dollar store frames! We found these frames at The Daiso over here in Japan. If you don't have a Daiso in your area, check out The Dollar Tree. The Dollar tree also has an online shop with a large selection of $1 embossed photo frames. Just go to the site and search "photo frames."Here's a link: https://www.dollartree.com/search/go?w=photo%20frames
I love to repurpose!It's simply thrilling to take something and turn it into something new...but it's even more thrilling to repurpose a piece that's already been repurposed once!Here's how I used an old window frame from ReStore twice.
This super simple project transformed boring, frumpy plastic hanging planters (that I picked up for $3 each at my local hardware store) into hanging planters that are more my style! The whole project only took a couple hours – and I’m in love with how they turned out!
Got a pet who keeps getting into your house plants? Then this project is for you. My cat kept getting into my house plants so I decided to throw together a coastal hanging planter to get my plants off the ground and out of her reach. This project is great if you’re going for that beachy vibe, but it can also stand alone as a stylish hanging planter. Check out my step-by-step tutorial to get started!
I will be honest with you, when I first tried to do this project I could not get it to work the way I wanted. I spent a couple of very frustrating hours trying to stick wet springy bark to pots, using a variety of glues to no avail.To make a Birch Bark covered pot like ours you will need some pieces of bark, a terracotta pot, elastic bands and PVA glue. We also painted the rim of our pot with a cream acrylic paint.
Our house only has a stoop for the front door...wanted a little seating area. Created a seating area under a newly created window box.
So the stay home order has lifted in my area, but that doesn’t mean I’m ready to run out to the store the first chance I get. I plan on playing it safe and limiting my exposure as much as possible for the for seeable future. Plus, I have a ton of random odds and ends in my craft room screaming to be used and I’m quite the home body anyway sooooo.... this is all fine by me!so being home has us spending more and more time outside, and any time I do go out for essentials I seem to find a plant I just can’t live without, all these plants need a home, so I had an idea! I have old wire planters, the kind that usually you plant things in with the coco liners, but what if I made over these wire frames to hold a potted plant?Off to the craft room I went to see what we had to work with!
Looking to fill your home with flowers, but not interested in having to water them every day? This tutorial was made for you. In five quick and easy steps you can have a beautiful DIY hanging planter that nobody would ever guess was full of faux flowers! All you need to do is stop by the Dollar Tree and pick up a few basic items, and your home will be a floral paradise in no time.
I've been shopping around for some large planters to put on my front porch. I wanted them larger so I could plant some Perenial Hostas in them. I love buying new flowers every year but it gets costly. So I thought planting perennials might be better because they come back every year. I knew I'd need a bigger Planter and went searching. I found These on Amazon (aff Link) Wooden Planter Boxes WAY to expensive for my little budget. So I convinced the beard to build some for me, and they cost a fraction of the price!
We're officially obsessed with indoor gardening and plants in general. We decided that we needed plants in every single room, so we built our own 'raining' plant hanger. I was skeptical about how it would turn out, but I'm actually really in love with it. It took us less than an hour to build and was easy to hang from the ceiling.
Here is a quickie little project that will give your patio or interiors a splash of modern cool. I love that this is repurposing something that tends to be in abundance by the end of summer: tomato cages. Whether you have old rusty cages, or brightly colored powder coated ones like these, the result is a collection of stands that gives you versatility of height and some sick lines! Original Blog PostPhoto Cred: Anya McInroy
When the sun is shining, I love to sit in my little town garden sipping a few cocktails with friends. Last week it finally felt that summer was on it's way so I decided to cheer up my outdoor space with an upcycled happy hour cocktail window. Here I'll show you both how I made my Happy Hour window and the cute cocktail caddy to go with it.
If you follow my blog you will know that I try and create all my projects from recycled materials. In our house, we all love Pepsi Max, which leaves us with a fair few aluminium cans. Instead of sending them to the recycling centre, I wanted to try and create an aluminium can wall hanging with them. Because aluminium cans are not very big, I wanted to create a wall hanging that was made up of smaller panels that could be arranged in different designs on the wall. So your wall hanging can be changed around when you get bored with the design.
I love to upcycle and reuse old maps, they are very affordable craft paper. There are so many fun things you can do with them. One of the most popular things I've made with them is beautiful roses (see here).This time I've used my old maps to create some beautiful moths for fun faux taxidermy wall art. You can give these as a gift if you use a map of somewhere special.
Who doesn't like decorating for the holidays? I love decorating for all holidays and I've made an early start on Americana decor. This cute DIY can be used for Independence Day, Memorial Day or Labor Day.I love that this type of decor can be used more than once unlike most of our other holiday decorations.As always, this is a cute, simple Dollar Tree DIY and is so fast and easy to make. Most of the materials I used were from around my house too which made this even better!Take a look at what I came up with.
This post just a follow up on our office place. The built in finished completely (finally handles came in) Beautiful so it did worth the wait (black walnut and gold). As I mentioned in my earlier post we had a nook which probably meant for a built in but it was too small to execute it. So after much consideration I just wanted a built in bench with additional storage and pillows. Easy enough and not to blow the budget( purchased wood before the lumber price increase) Kept the same paint color as the built in same top as the desk (white oak) and after getting prices on a custom made bench cushion decided to make it by myself.Anyway,here are some pictures.P.S I wanted shiplap to the beck of the wall but it wasn't in the budget and might do it down the road or not:)
Today, I am sharing an easy chair seat repair that we have used time and again! Plus, you’re going to LOVE this rare antique desk chair! And yes, there are TWO of them!!
This project was so much fun to make! I love anything Patriotic/Americana, and what is more Patriotic than Uncle Sam?! I had some wood laying around from other projects, so I thought I would put together a Uncle Sam Porch Sitter. He turned out AMAZING!
They must have been MASSIVELY mass produced. These lovely cut glass luncheon plates with matching cups were, at one time, the standard for serving “a light lunch” at baby showers, wedding showers, church meetings, bridge clubs and other hosted “Ladies who Lunch” events.
Find the easy steps to make a sugar scrub that’s fragrant and pretty too. Ready to gift or use in just five minutes!
We have a large wall by our backyard patio for which we need large wall art. And, I mean LARGE! Last week, I gave our front porch swing a mini-makeover. We are loving our new front porch sanctuary and are now turning attention to the back patio. Time to add some “zing!” to the back as we did to the front. (See last week’s porch swing makeover here.)