DIY Tufted Bench Cushion

Jillian
by Jillian
2 Hours
Medium
Made this bench cushion out of from padding on top of plywood, fabric, and buttons. What do u think? :)
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
3 of 7 comments
  • Courtney Christensen Courtney Christensen on Mar 16, 2018

    I love this. Are you willing to share how you did it? I would be very interested as I have a window seat I would really like to make a cushion like this for.

    Thanks!

    • Jillian Jillian on Mar 16, 2018

      HI there! Sorry this was my first post and didn't and much if any details! My bad. I also don't have the photos anymore...

      It is just a sheet of plywood , with foam and then material ...i cut holes in the foam , layed the material over and used a screw and washer and went through the fabric and into the wood. I then pulled the fabric taught the stapled it to the back. I hacked my own covered buttons with some cheap buttons from the dollar store and covered them with some ice the extra fabric. Glued with super glue and used the gorilla glue hot glue sticks to attached them into where the screws were. That's it! I hope this muddy explanation makes at least some sense! Good luck!!😉

  • Ashley Bannister Ashley Bannister on Nov 01, 2018

    Wow thanks so much for sharing this I didn't realize I would be able to make one so easy! And perfect timing that I came across it because we are turning our front closet into a bench area :) looks amazing like you bought it from a store!!

Next