We have hardwood floors. Before we moved in 10 yrs. ago we had them refinished.
-
KMS Woodworks on Jan 05, 2012If the damage is not "into" the wood but merely with the "finish" a screen and re-coat is a quick fix. This process does not produce the full amounts of dust that a "sand to bare wood" refinish does. If the finish is worn into the wood and the wood grain is darkened or soiled you will need a full sand.Helpful Reply
-
-
Gene on Jan 05, 2012KMS - Would I have to do the entire floor or could I just do the worn spots>Helpful Reply
-
-
Nichter's Home Services Corp on Jan 05, 2012The answer depends what kind of finish you have on it nowHelpful Reply
-
-
Nichter's Home Services Corp on Jan 05, 2012In other words is it oil based poly, water based poly or acrylic, or a rubbing oilHelpful Reply
-
-
Gene on Jan 05, 2012It is oil base poly.Helpful Reply
-
-
KMS Woodworks on Jan 05, 2012Spot finishes only look good when working with penetrating oils...a Surface finish like oil poly the whole room should be screened/ finished. Check out this article I wrote on floor finishes. http://www.networx.com/article/exotic-wood-floor-finishes-you-havent-sHelpful Reply
-
-
Nichter's Home Services Corp on Jan 08, 2012I would touch up the worn spot, then screen the whole room and topcoat it all thenHelpful Reply
-
-
Moda Floors and Interiors on Jan 09, 2012I agree a screen and coat would do the trick to restore the worn areas. It has been my experience doing only small areas can show the difference between the existing and newly coated areas, therefore I would suggest doing the whole room!Helpful Reply
-
-
Mike N on Jan 09, 2012I advise my clients that a whole room refinish will yield the most satisfactory result. In fact, I rarely agree to do anything else because even after I've warned clients in the past that consistency throughout cannot be guaranteed, and they've agreed and understand up-front, they are more often than not dissatisfied with the result. Even when the result is virtually unnoticeable. I feel like I'm doing more of a disservice to my clients by "saving" them money up front when it's likely that the final product won't meet their expectations, regardless of how well I explain the process. If no floor transitions between rooms are present (thresholds between rooms) which would help reduce the amount of floor finishing needed, I would suggest doing yourself a favor and just re-do the entire room. As long as the room isn't gigantic the cost difference should be negligible. (Floor sand/screen & finish should cost no more than $5 psf.)Helpful Reply
-
-
Gene on Jan 09, 2012My problem(s) with doing the entire 'room' is that it would involve the kitchen, breakfast area, dinning room, entrance foyer and hallway. And a lot of furniture and 'stuff' to move and a lot to cover to keep the dust off.Helpful Reply
-
-
Barbara on Jan 09, 2012Is screening the same as sanding? My floors was just sanded a year ago and I use that Bona stuff and they are still dull. Why, what am I doing wrong.Helpful Reply
-
-
KMS Woodworks on Jan 10, 2012Screening is the "diet" version of a floor refinish process. The top of the existing finish in merely "roughed up" by a fine grit "screen" (the screen resembles a silicon carbide "dry wall" screen but is big and round to fit a floor buff). This mechanical abrasion allows a new top coat of finish to bind better. Sanding is where the old finish is sanded away all to way down to bare wood...and this process is dusty...the screening is very "tame" in the dust dept.. Screening only really works if the existing finish is only dull or slightly damaged...if the wear in down to the wood a screening will not fix it and the soiling or dirt is "sealed in". Also since screening is a light process any cupping or crowning of the wood is not corrected.Helpful Reply
-
-
Sheila B on Jan 24, 2012When refinishing, is oil or water better?Helpful Reply
-
-
KMS Woodworks on Jan 25, 2012Oil is the only way in my book...it brings a lot more life and color to the party. These two pics show a before and after...the owner had installed rustic white oak and finished it with a basic water based product...this was a simple and basic job 1 or 2 coats. In less than a year I was brought in to "fix" it as the water base was failing in many areas. I completely sanded the floor and then applied 3 coats of an oil based poly as you can see from the after pics the floor looks like rustic white oak should.Helpful Reply
-
-
Barbara on Jan 26, 2012I guess I will have to have you come redo mine sometime in the future! Love it.Helpful Reply
-
-
Sheila B on Jan 26, 2012Thanks KMS. I was told water was more "organic" or "green" and so I was just wondering which was really best. I love the way the floors in the picture turned out. Also, do you prefer wood from the US or is there any imported that you like better? What about if you were putting down a floor that was prefinished? what are your thought on a prefinished floore?Helpful Reply
-
-
KMS Woodworks on Jan 27, 2012There are some oil based finishes that are "greener" than others...this has to do with VOC's and such. Some of the catalyzed finishes (Glitza) can be darn right nasty and require the use of organic respirators. A locally produced domestic floor is very green in the sense that it is local. As far as domestic floor / exotic goes its a mixed bag. A good number of the exotics are much harder in their Janka hardness ratings and offer colors not found in your basic oaks and maples. As a wood worker and flooring guy I love working with cherry, one of my favorites. When I remodeled my home I installed about 600 sq ft of Jatoba (Brazilian Cherry) in my master bed room. I used a sand in place product and finished it with linseed oil...a green penetrating finish. Personally I prefer the sand in place floors as the little groove between boards (in prefinished) is distracting to me. Check out this article I wrote on floor finish types. http://www.networx.com/article/exotic-wood-floor-finishes-you-havent-sHelpful Reply
-
-
Builders Floor Covering, Inc. on Feb 01, 2012Some times you can get away with just a buff and coat. I would try that first.Helpful Reply
-
-
Dustless Wood Floor Refinishing on Mar 07, 2012You need a Screen & Recoat, Buff the floor with a 120 grit screen and then apply two coats of finish. This will prep the floor so the finish will bond and restores the gloss.Helpful Reply
-
Related Discussions
How do I clean salt marks on my salt water pool?
My salt water pool leaves white marks all around the pool I have tried everything to remove them with no luck. Can someone please help me????
If you could redo your master bathroom, what would you change?
Dreaming of a master bathroom remodel?Tell us: If you could change just one thing, what would it be?Your input could inspire others looking for master bathroom ideas ... See more
Hardwood Floors or Carpet in Bedroom: What's Your Preference?
Hey Hometalkers! We've got a cozy debate going on here: when it comes to bedroom flooring, do you lean towards the warmth of carpet or the timeless elegance of hardwo... See more
What can I do about wood smoke coming into my house?
I need help. My back door neighbor heats with a wood stove all winter. They are downhill from me. Almost all their smoke makes its way into my house, causing headache... See more
How to find out the value of antique furniture
My husband and I are looking to sell his grandmother's dining room set but, we have no idea what to ask for it. We could not find any markings as to who made it, all ... See more
How do I fix a broken metal hanging rod in my closet
I have a broken shelf hanging rod in my closet I tried gluing And taping it and nothing worked I need help and also the shelf is slightly bent