Has anyone installed board and batten?
-
Woodbridge Environmental Tiptophouse.com on Feb 08, 2012This is a great DIY project. Its not to difficult to do and can be fun as well. Be sure you have lots of room to work, and set up your shop right in the room if you can. It appears that you found out how to do this already so it sounds like your good to go. As far as the texture. If its overall smooth you can go right over it. However if there are many high and low spots you may want to remove it and start fresh with a new sheet of wall board. 2/3 the way up sounds a bit high. I would stop it about a chair rail height. But that is me. Here is a step by step site that may help. It shows the wall with some texture and how it worked out. http://www.decorchick.com/multipurpose-room-progress-board-and-batten/ As far as your fiance, tell him your just getting started and its only going to get better from here! Take photos and show us your progress.Helpful Reply
-
-
AA Marble & Granite, LLC on Feb 09, 2012I've done it my own home. What a fun project. And the results are worth a milllion bucks....we maybe not a million...Helpful Reply
-
-
Cassandra N on Feb 11, 2012Was there a resource you used to learn how to do it? My fiance and I have never installed it, and also want to rip up and install new baseboards.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 11, 2012Your best resource is here. Do you need step by step or just a quick overview? If you can post photos of the room so we have an idea of what your project will be and perhaps some photos of what your looking to install. There are several of us that can help you through this project.Helpful Reply
-
-
Cassandra N on Mar 11, 2012http://concertoincassandra.blogspot.com/2012/03/living-room-redmodel-part-1-installing.html We finished it! Working on getting everything put together for the blog, but our baseboard remodel is up and running. Thanks!Helpful Reply
-
-
Vicky on Jun 10, 2015have you checked YouTube? there are videos out thereHelpful Reply
-
Related Discussions
How do I install board and batten utilizing metal studs?
My home has metal studs and my hubby is concerned that it will be too difficult to attach board and batten to these studs. Will I have to use screws? Or would a nail... See more
How do you install wainscot or batten and board around baseboard heat?
I want a finished, professional look to my wall, but the baseboard heating protrudes from the bottom of the wall.
Has anyone installed cup pulls using only 1 screw and liquid nails?
I don't want to drill another hole in my cabinets. Thanks for any help!
Has anyone made a headboard for cpap users?
I’ve seen pictures on Pinterest but the company doesn’t make them for the US. It’s very basically a wooden headboard but there are shelves sideways (not in fron... See more
How do I best waterproof a window in a shower?
We have no choice but to put a shower over our current bath due to cost but we have a window smack bang in the middle which we can’t move. Any ideas would be great ... See more
What can I do with this old storage shelf? I want to repurpose it...
i have this old VHS storage shelf and I know I can repurpose it but can't seem to think of anything. Does anyone have any ideas?