Decorative Coat Rack From Found Objects


Just about everyone needs a coat rack in the foyer, by the mudroom, or in the workshop. Get creative and have some fun making your own! Finding and repurposing interesting old doorknobs, plumbing fixtures or tools is just part of the fun.
See complete blog for more detail and ideas on where to look for supplies.
Tools mentioned can be found at Woodcraft.com.
Decorative Coat Rack from Found Objects
STEP 1. Find board for the base.
Find something with lots of character. Clean it up with water and a stiff brush, and let it dry.
True up the edge of your board
STEP 2. Mill and attach shelf.
Check for nails and remove any found metal. True up the edge of your board with a straightedge and a circular saw. Attach shelf using finish nails or for a stronger, more concealed joint, consider using a Kreg Jig and pocketholes.
A variety of inexpensive items can be used
STEP 3. Collect hangers for a decorative look.
For our coat rack, we used some interesting doorknobs and escutcheon plates found during one visit to a local flea market.
Disassemble and clean knobs and plates
The knobs and plates were disassembled, cleaned and then shot with a light coat of Watco Spray Lacquer in Semi-Gloss. The lacquer will stabilize any loose paint and cover any rust or dirt that might remain. Now you are ready to apply any color Milk Paint, stain or finish of your choice.
Prepare board by removing rough edges
STEP 4. Prepare board with desired finish.
The boards used in our demo project had a lot of rustic character that we wanted to keep. We lightly sanded the surface and burnished the edges to reduce the chance of splinters.
Add paint, stain or finish of your choice
The shelf was from a different species of wood and was significantly lighter in color than the base wood. We applied a few coats of Dark Oak Briwax to even out the color of the shelf and applied Clear Briwax to the other board. After drying, we buffed with a soft cloth. This left a nice sheen to the surface but retained the rustic rough-hewn look.
Arrange and space the knobs for hangers
STEP 5 - Arrange and space knobs.
Position the knobs in an attractive pattern. We used two long lock plates on either end and accented some of the other knobs with Keyhole Escutcheons. A bit of black paint behind the keyholes finished the look.
Mark location for knobs with a ruler/square.
STEP 6 - Attach knobs.
The knobs need to be secure and sturdy enough to hold the heaviest item that you plan to hang. For most of the knobs, we used carriage bolts set flush through the back and used 5-minute epoxy to set these in place. Dowels, screws and epoxy can help hold your knobs in place. The adhesive will help fill any gaps or voids and bond the "unlike" materials for a strong hold. Mark for knobs with a ruler or square, drill the holes, and install the knob's mounting hardware from the back.
Install mounting hardware and hang it up!
STEP 7 - Install mounting hardware to hang unit.
Depending on the size of your coat rack, you'll want at least two hangers on the back, spaced 16 apart. Keyhole brackets were placed at 16 on center at the back of our main board to allow mounting on washer head screws into studs. These hangers can be moved to accommodate your specific install. We recommend positioning the piece where you want it on the wall and then finding the studs. Transfer the stud positions onto the piece, and install. If you opt to screw the coat rack directly to the studs, hide the mounting screws under hardware or button head caps.

Top Hometalk Projects

30 Creative Ways To Repurpose Baking Pans
30 Unusual & Helpful Gardening Tips You'll Want To Know
30 Creative Ways To Repurpose Baking Pans
31 Space Saving Storage Ideas That'll Keep Your Home Organized
31 Amazing Furniture Flips You Have to See to Believe
16 Creative Ways To Upcycle Pallets
30 Unusual & Helpful Gardening Tips You'll Want To Know
21 Totally Terrific Things You Can Do With Doilies
11 Unexpected Ways to Use Spices in Your Home
The Easiest Ways to Grow a Bumper Crop of Tomatoes
17 Faux Brick Ideas For Your Home
11 Unexpected Ways to Use Spices in Your Home
18 Adorable Bird Feeders You'll Want To Make Right Now
15 Genius Curtain Ideas To Instantly Upgrade Your Space
15 Genius Curtain Ideas To Instantly Upgrade Your Space
Lori Haught Harper

Want more details about this and other DIY projects? Check out my blog post!

Go

Have a question about this project?

3 questions
  • Lee Berardi
    on Feb 14, 2016

    What are you going to do with the water spout ??

    • Lori Haught Harper
      on Feb 16, 2016

      We found the water spout during our flea market expedition...didn't end up using it for this particular project, but who knows?? :)

  • Dtu186937
    on Feb 14, 2016

    Can u post a picture of the back, PLEASE?

    • Lori Haught Harper
      on Feb 16, 2016

      We used keyhole brackets for the hangers. Hope this pic helps. If not, I can try to get another one for you.

  • Leslie Allison
    on Feb 15, 2016

    What did you do with the old faucet? I used faucets in my bathroom for wall hooks.

    • Lori Haught Harper
      on Feb 16, 2016

      Isn't it cool looking? We found it during our outing to the flea market but didn't end up using it for this project. Great idea for the bathroom!

Join the conversation

2 of 40 comments
  • Teresa
    on Sep 5, 2017

    Funny, I picked up some cool old door knobs for just this project about a month ago! I want to hang mine higher for hats, above the coat rack.
  • Albert Arnett
    on Oct 12, 2017

    I must say I do like that display of old door knobs.
Your comment...