We are going to redo the lawn of our new house ourselves. Digging the border today, I found this green mesh underneath, maybe 3/4 inch from the surface, clearly from a previous owner. Is this going to be a problem when I till the soil?
What you are seeing is the mesh that was in the original sod. It is usually just in Fescue sod to help hold the pieces together when cut and shipped from the sod farm.
You can till with all of that green mesh, but it will begin wrapping up on the tines. What we have typically done is periodically stopped, and cleaned the mesh off the tines. You still need to till, so don't skip that step. But you will have some extra work to deal with along the way.
They like to use it with grass rolls a lot. Yes, it is going to be a pain to get through and as ST stated, nothing for it but to get through it. Are you renovating a large area?
Geez.... That's a good question. The same "nylon" netting became exposed at our local dog park. I tried pulling it up so the pups wouldn't trip or get cut. Impossible stuff to break!
When you say till - are you saying by hand or with a "tiller"? If using an actual tiller I think you could run into BIG PROBLEMS if this mesh stuff gets entangled in the tines. Just a thought??????
Given the size, I was hoping to use a mechanical tiller -- keeping in mind what Southern Trillium said about stopping frequently to remove the mesh. I know it's going to be a big job.
I'm having the same issue! I decided to dig it up with a shovel and then rake out the grass and plastic pieces. I just did one section and it has been such a pain in the ass that I am considering taking my risk with the tiller for the larger sections. The mesh broke so easily with the shovel (it's about 20 years old), I'm hoping I wont have issues.
We tilled my yard with a tiller. The green mesh usually broke and didn't create a problem. I was able to rake most of the mesh up while leveling the dirt post tilling.
To anyone just reading this, it usually just requires a box cutter knife to cut up the mesh that gets around the tines occasionally to keep too much mesh from mixing with roots and sod and clogging the tiller. I have just stopped every hour or so to clear the tines. It is a good 5 min break from tilling anyway. Then rake the mesh out that is sticking up through the ground. Whatever is left in the ground was there before, and not causing problems, so leave it.
You can concoct your own cleaning products with natural ingredients that are just as effective as commercial cleaners with questionable chemicals. Baking soda and... See more
I have no dandruff,or psoriasis. I have a red itchy and burning strictly from nerves and STRESS AND ANXIETY.I did have a biospy done and it all csme back non specific... See more
We live rurally and even with a water softener and rust removing pellets these really help clean my fiberglass shower/ tub combo. I am concerned about chemical... See more
What you are seeing is the mesh that was in the original sod. It is usually just in Fescue sod to help hold the pieces together when cut and shipped from the sod farm. You can till with all of that green mesh, but it will begin wrapping up on the tines. What we have typically done is periodically stopped, and cleaned the mesh off the tines. You still need to till, so don't skip that step. But you will have some extra work to deal with along the way.
Less of a hassle than buried landscape fabric, but still a nuisance. Good luck with your lawn renovation, Melissa.
They like to use it with grass rolls a lot. Yes, it is going to be a pain to get through and as ST stated, nothing for it but to get through it. Are you renovating a large area?
We're going to try to do the whole front lawn, which is by a very rough estimate 60x80 feet.
The mesh is most likely from sod being layed over soil.
You go girl! You are going to get to much satisfaction from it and your lawn is going to be beautiful! Can't wait to see pictures! YOU CAN DIY!
Geez.... That's a good question. The same "nylon" netting became exposed at our local dog park. I tried pulling it up so the pups wouldn't trip or get cut. Impossible stuff to break!
When you say till - are you saying by hand or with a "tiller"? If using an actual tiller I think you could run into BIG PROBLEMS if this mesh stuff gets entangled in the tines. Just a thought??????
Given the size, I was hoping to use a mechanical tiller -- keeping in mind what Southern Trillium said about stopping frequently to remove the mesh. I know it's going to be a big job.
I'm having the same issue! I decided to dig it up with a shovel and then rake out the grass and plastic pieces. I just did one section and it has been such a pain in the ass that I am considering taking my risk with the tiller for the larger sections. The mesh broke so easily with the shovel (it's about 20 years old), I'm hoping I wont have issues.
We tilled my yard with a tiller. The green mesh usually broke and didn't create a problem. I was able to rake most of the mesh up while leveling the dirt post tilling.
So sorry that some people don't remove the mesh before laying out the sod!! i would start out slowly with a tiller.