Pebble and Glass Bathroom Vanity

4 materials
I built a tray for the vanity and put pebbles in, covered it with plate glass, tiled around it and added a glass vessel sink and waterfall faucet. Love how it turned out
Measured vanity top
After you remove the original counter top it leave the top of the cabinet open.
Then we built a box with a heavy plywood bottom about 3/4" deep (depending on your vanity and plumbing).
Attached the painted box to the inside of the cabinet and fill with pebbles (I used polished)
Measure the glass you will need.
Be sure it's thick enough to hold the sink and have the glass company cut holes for the sink and faucet.
Apply the glass and install the sink and faucet.
Before..

Suggested materials:

  • Plywood for base and trim for top   (Home Depot)
  • Pebbbles   (Michaels)
  • Glass top   (Glass store Special order)
See all materials

Questions on this post

Have a question about this project?

Your question...
3 of 33 questions

Comments

Join the conversation

2 of 356 comments
Your comment...
Next