Repurposed Scrap Redwood Fence And a Louvered Window Shutter
by
Lance irwin
1.5 Minutes
Easy
I have quite a few old window shutters and scrap redwood fence of various sizes and colors I've been saving for projects.
56 inch high by 24 inch wide window shutter
I took scrap redwood fence planks various colors then cut them to length for the sides and cut them with for the shelves...
I had four of these that I cut to use for the sides (two on each side). I connected each together with cut off scrap from the planks themselves eliminating buying any extra hardware such as metal bracket connectors.
These are a few of the planks are used to make the shelves. Each shelf had a total of two planks per shelf connected again by "cut-offs".
If you look closely at this picture and the following pictures you can see that I connected the shelves to the side panels using scrap "cut-offs" to save $....
Left side
Back
Right side....
The most difficult part of the project was making everything even because I was working with warped wood....
Frequently asked questions
Have a question about this project?