Reuphostered Shaker Style Rocking Chair Seat
by
Ouina
9 Materials
Received an old rocker from my aunt. She said is was her aunt's rocker so maybe early 1900's? The seat was horrible - the foam pad had disintegrated into dust. So....I learned through YouTube videos how to reupholster. Let's hope I learned well!
A look at the finished product. I may or may not refinish the chair itself. I kind of like the worn look knowing that my great aunt and aunt have used this chair.
Rocker seat bones.
This is the rocker with the old upholstery removed as well as the ties on the springs. Pretty nasty stuff!
Materials assembled
Assembled all the materials and tools needed to complete this job. The new seat cover is a tapestry I found in a "flea" market in Paris! I had this project in mind when I saw it.
Securing the chair springs
I chose not to replace the chair springs. Maybe I should have but they seemed in great condition. I started by using the twine to secure the springs. YouTube is great for this!
Close up of the knots used on the springs. Again, thank you YouTube!
Finished. Ran two across and then on the diagonal.
Fitting the burlap - to cover the springs.
A look at the burlap nailed with upholstery tacks on the underside.
Sprayed adhesive on the foam pad. I cut the foam pad with a bread knife. I didn't have an electric knife which would have made this job easier. Sprayed the right side of the burlap cover with adhesive and then placed the sized foam pad over the adhesive. This helps to hold everything in place. Then used several layers of dacron padding to sort of form a "wedding cake" layered look so that the chair pad would look puffy and rounded. You can see in this photo the layers (upside down). Sorry, I forgot to take photos of the foam pad and dacron from the top!
Then started centering the tapestry (I sewed a band of dark green upholstery fabric to the tapestry so that I would have enough to cover the chair seat and sides.) Look hard and you can see the fabric as the last layer. The hard part next was pulling everything to the underside and stapling/tacking it in place. My husband luckily was around for that part!
Finished!
A close up of the finished project.
Comments
Join the conversation
3 of 8 comments
-
Absolutely exquisite! Your project turned out gorgeous, enjoy it and let it remind you of the great memories you have of your dear aunt.
-
Your rocking chair is beautiful! Love the fabric and you centered it all perfectly.
Frequently asked questions
Have a question about this project?