Decoupage onto Formica

Question

I want to decoupage book pages onto the back wall of my Formica built ins using modpodge.  Can I glues pages in place using spray adhesive and then cover with modpodge or do I need to use modpodge as a base and a sealer?

Pat Russell · Answer

I haven't tried this on Formica, but have on other slick surfaces: scratch it up a bit with medium sandpaper or a sander (which is easier to use on the back of the cabinet). Just enough roughed up to make the glue and picture or whatever to stick without sliding down! Then finish the completed wall with a light coat of wax to make it look shiny. If you are covering the entire back wall, the wax isn't necessary. Of course, it isn't necessary at all!!!!

Susan Franklin · Answer

I think I would worry about self leveling. Will the Modpodge puddle at the bottom. Would it be possible to have the surface placed horizontally? I don't use Modpodge but I have used EnviroTex (two part epoxy) and it is also self leveling.

Bernice H · Answer

I cant help you but i think it is a wonderful idea! be sure to show us!

LindaK · Answer

I think you can use the outdoor waterproof type of Modpodge. Use the product to both adhere and cover the book pages. Use several thin coats to prevent drips, follow the directions on the jar for best results. They have several options now for lots of different crafts. I am a crafter who just likes their products.

MicheLe · Answer

Using a spray adhesive should work perfectly, and then cover with modpodge.

Bernice H · Answer

Well,even if it doesn't,we like fails or semi fails. They teach us too!  I will be posting semi good semi fail as soon as I can get my pictures organized. So go for it! If it doesn't turn out well, we will learn how it could have been handled better! Yeaaayyy!

Nancy Williams · Answer

I think you shouldn't go for a perfect look. Maybe sand a little between layering pages after they dry well...I just like a lot of personality.

Chey · Answer

I've used spray adhesive, then applied paper, then mod podge. Worked very well and still holding. the mod podge will help the pages adhere as well.

Chey · Answer

You're welcome! Sounds like a creative fun project. Thanks for the inspiration - it's giving me an idea for the inside of my kitchen cabinets. : )

Sheila Heaney · Answer

I've had a LOT of problems with mod lodge. After a year of letting a tray that I had mod podged sit, I put something on it (was not mod podged) and they stuck together. The finish was partially removed and looks terrible. Now I have no idea what to do

Zard Pocleeb · Answer

In my opinion mod podge is good for small areas but I wouldn’t use it for a larger area. You might want to consider using another product to seal it, but make sure it isn’t water based or it will ruin the pages.

Agnes Chrzanowska · Answer

Here are some ideas https://www.pinterest.com/search/pins/?q=Decoupage%20onto%20Formica&rs=typed&term_meta[]=Decoupage%7Ctyped&term_meta[]=onto%7Ctyped&term_meta[]=Formica%7Ctyped

Decoupage onto Formica

Suggested Project Book

15 Gorgeous Bohemian Inspired Decor Items To Make For Yourself

Other

More

Decoupage onto Formica

Suggested Project Book