Custom Made cabinets my brother and I made for a friends new home.

Roger S
by Roger S
$
3 Weeks
Advanced
Made from 3/4" oak plywood for sides and shelves with solid oak raised panel doors and drawer fronts. Drawers are 1/2" plywood sides and 1/4" bottoms. finish is Early American with 3 coats of Polyurethane satin floor finish. Counter top was from Lowes.
Stove and Microwave vent hood opening
Inside of cabinets
Sink and lower cabinets
Top and bottom cabinets after installation.
Wall cabinets at refrigerator
Lower section at refrigerator
Corner cabinet with Lazy Susan with attached doors that rotate with the shelve unit.
Left side of stove
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
2 of 15 comments
  • KMS Woodworks KMS Woodworks on Jun 06, 2012
    Roger.... I'm running my raised panel bits with a 3 1/4 hp Porter cable 7518 I've got this mounted in my table saw extension wing. I use my smaller 690 for hand work
  • Jeanette S Jeanette S on Jun 06, 2012
    It must be great to have talented friends like this! Great job!
Next