DIY Restoration Hardware Inspired Lamp Makeover

3 Materials
These beautiful brass lamps were lovely, but my client wanted to give them a more modern updated makeover. We both loved the look of the lamps we'd seen in catalogs like Ballard Designs, Pottery Barn and of course Restoration Hardware but we didn't want to spend the money on new lamps. I decided to try to recreate the "greige" finish on these brass lamps and we both were thrilled about how they came out!
Here is the before. I cleaned them thoroughly before priming them with a shellac based primer. My favorite is Zinzer primer.
I made sure that I let the primer dry very well in between each coat.
Then I applied 2 coats of Sherwin Williams paint in a matte finish. The color I used was Virtual Taupe.
The next step I did was to make my own liming wax. I used Johnson's paste wax mixed with white latex paint. I used a cheap chip brush to kind of dry brush the liming wax all over the lamps. I let the wax kind of settle into the brush marks of the base coat. I wiped off any excess with a blue shop towel.
Here is the finished product! The lamp is totally transformed!
Since there were two sets of lamps, I decided to make the other set darker. For this set, I also made a diy wax but instead of using paint I used dark stain. I used the same technique, dry brushing the wax on and then removing any excess.
And here it is finished! For more photos and information click the link to go to my blog!
Suggested materials:
  • Sherwin Williams paint   (Sherwin Williams)
  • Johnson's Paste Wax   (Home Depot)
  • Minwax Stain   (Home Depot)
Wild Sparrow Designs
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 13 questions
  • Hea28925324 Hea28925324 on Aug 08, 2017

    This project is at the top of my to do list with a pair of lamps I found at an auction. However, I'm having a difficult time finding new shades that I like. May I ask where you found the ones in this post? They are just what I have in mind! Thank you!

  • Laurel Dray Conrad Laurel Dray Conrad on Dec 08, 2018

    Where did you get the lampshades?

  • Sun99962746 Sun99962746 on Feb 29, 2024

    Which Zinzer Primer did you use as they do a number of primers which are very different.

    I actually like the finish with just the primer!

Comments
Join the conversation
2 of 123 comments
Next