Clean and Lube Your Tower Fan to Keep It Running

Did you know that your tower fan needs regular maintenance to keep them running? Tower fans are upwards of $40 and more and are great for circulating air in the summer. I have 3 fans that run from June through October and boy do they get nasty with pet hair and dust!
I have one tower fan that is over 9 years old! and the one I used for this post is over 6 years old. Truth be told it stops working when the dust and hair gunk up the fan blade motor. It is not hard to take apart these fans and clean and lube them.
Want to see more? Stop on over and read more
If the fan motor stops working, then you need unplug, remove the cover, and clean and lube.
Fan covers can be removed!
See how much gunk from a season of use! Use WD40 or other lubricant and get that tower fan running again
Most often there are screws holding on the back fan cover.

Top Hometalk Projects

15 Things To Do With Scrap Material
21 Ways to Have More Polka Dots in Your Life
23 Insanely Clever Ways To Eliminate Clutter
15 Fabulous Fire Pits For Your Backyard
21 Totally Terrific Things You Can Do With Doilies
29 Of The Best DIY Mirror Projects Ever Made
30 Creative Ways To Repurpose Baking Pans
30 Creative Ways To Repurpose Baking Pans
13 Spectacular Ways To Display Your House Number
30 Creative Painting Techniques & Ideas You MUST See!
15 Things To Do With Scrap Material
11 Unexpected Ways to Use Spices in Your Home
22 Ideas To Make Your Terra Cotta Pots Look Oh-So-Pretty
30 Genius Ways To Make The Most Of Your Closet Space
11 Unexpected Ways to Use Spices in Your Home
The Garden Frog with C Renee

Want more details about this and other DIY projects? Check out my blog post!


Have a question about this project?

3 of 6 questions
  • Hfl7897098
    on Jul 21, 2016

    I unscrewed every screw a total of 6 and I still could not take the casing out. is there a technique?

  • Mechelle Adams-Flowers
    on Aug 18, 2016

    Can this be done to a smaller Dyson or should I just keep using the small vacuum attachment. Thanks

    • Carol Williams
      on Sep 2, 2017

      My Lasko tower fan also has 6 screws. 2 of them are sunk deep & I got all the screws out except for 1 of the deeper ones because it appears not to be a phillips head like the other 5. A flat head screw driver does not get it out either. When I shine a flashlight in the hole, it sort of looks like a flat head screw, but in not. It looks like a special screw! I am so close to getting the back cover off, but... Any suggestions?
  • Carol Williams
    on Sep 2, 2017

    My Lasko tower fan has 6 screws, 5 of which are phillips head screws. 2 are sunk deep into holes. The one I can't get out is one sunk into a deep hole. When I shine a flashlight into the hole, it sort of looks like a flat head screw, but without the slots. I think they used a special screw so the cover will not be removed. It is not a hexhead screw, either, but something I've never seen before. I am so close to getting the cover off, except for the one. I am tempted to break the cover to get it off. I need to clean & lube this fan, it is making a strange new noise when I have it on.
    Any suggestions?
    • Chu33515585
      on May 29, 2018

      I just disassembled my Lasko tower fan. If it is like mine, it is a triangular screw that is sunk about a little over 2 inches in. I used a long arm 2mm Allen wrench (hex key) to remove it.

Join the conversation

3 of 96 comments
  • Cwh7922453
    on Nov 12, 2017

    Thanks for sharing!
  • Linda Hardin
    on Feb 2, 2019

    I read the comment about not throwing things away. How true that is. I live in a mobile home park near the dumpsters. I routinely check them for discarded fans and vacuums. You would be shocked at the things I find. So far after 4 years I have not found the first vacuum that was;t in working order after cleaning. Some looked brand new. Even a Dyson. Fans too. They all just needed cleaning and lubricating. We are a country with an embarrassment of riches. The vacuums were clogged with carpet freshener. It must be a vacuum cleaner salesman best friend. One tower fan I found had the odd screw that was mentioned. It was a very expensive fan too. It needed a fuse. It has worked 2 years for me. I know some will look down on me for dumpster hauls, but it is terrible the things that are thrown away with so many in need. I give most of the stuff I get out away to needy people after cleaning. Clothes still have tags on most. It makes me so sad to think of all the good things that are wasted each and every day.

    • ViKi Payne
      on Jun 16, 2019

      You have NOTHING to be ashamed of!!!! You are doing a wonderful thing, not only for others, but for the environment as well! I commend you for all that you do!!! God is very pleased as well!!! "Waste NOT, WANT not"!!! Keep up the great work!!!! ♥️

Your comment...