Asked on Aug 27, 2016

Using a cement board as a countertop

Peter RobinsonJohn BiermacherWilliam


Can you use a cement board (I.e. Hardie board, Duroc) on top of the original countertop and seal it to get a "cement" countertop? If so, will it be heat resistant?
8 answers
  • Gwp9042457
    on Aug 28, 2016


  • Darla
    on Aug 29, 2016

    It would be rough, not really suitable for a counter top. You might be able to skim coat and seal it though, and you would have to find a way to finish the edges.

  • Anna
    on Aug 29, 2016

    Cement is closer to drywall than it is to concrete. It has paper, top and bottom, like drywall so it would not be suitable for your purpose.

  • LWellborn
    on Sep 3, 2016

    Decided not to try it.

  • John Biermacher
    John Biermacher
    on Jan 13, 2018

    I used it years ago on a service counter and will check in with the client to see how it is holding up. I am considering using it for an industrial dining table for our covered deck. I will keep you posted.
    • John Biermacher
      John Biermacher
      on Mar 4, 2018

      I checked with the client and she said it has held up well And still looks good. I am going to use it again on another bar and then an industrial dining table. Can't remember what I sealed it with but suspect it was many coats of acrylic Varnish.
  • William
    on Jan 13, 2018

    NO! It's made to be used as a substrate under a finish surface. Even a skim coat would be too thin for a countertop. It would just flake off over time.
  • John Biermacher
    John Biermacher
    on May 21, 2018

    I got around to doing the bars ( The discussion will reveal some pluses and minuses, but for the most part I am quite happy. The one I sealed with acrylic varnish became blotchy and then had to be painted to look like concrete and then sealed with oil based polyurethane. The second one just has multiple coats of the urethane and looks like light colored concrete. Consequently it is only as heat resistant As the polyurethane.

    5/8/2019. Please see my recent reply to Peter- I ended up replacing the cement board with reclaimed lumber, primarily for aesthetics.

    • John Biermacher
      John Biermacher
      on May 8, 2019


      i just wanted to let you know that I replaced the cement board with reclaimed lumber and then they sold. I think it was an aesthetics, not functionality. One I did with acrylic varnish- it was quite blotchy and I over sprayed it with some gray, silver, and black spray paint. It looked uniform and had the color of concrete, but didn’t really look like concrete.

      the other I sealed with oil base polyurethane and it really took on an amber hue- kind of an old Formica look.

      From a durability point of view, I don’t see why you couldn’t coat it with epoxy. I simply don’t know what it will look like.

      Best wishes.


  • Peter Robinson
    Peter Robinson
    on May 10, 2019

    Thanks, John, for your quick reply!

Your comment...