I'm so excited to share this super cute twist on serving drinks at your next event! There are so many variations to this project where you can really make it your own--whether you paint your pumpkin first, or carve it in a way that the tap looks like it's a mouth, or use a different fruit altogether such as a watermelon--you can really let your creativity shine with this project!
I'm so happy I discovered this keg tapping kit--it will make our next gathering so much more detailed. Whether it's a summer party with watermelon or a harvest part with a pumpkin, I'm sure our guests will rave about this idea of tapping real fruit! Don't forget to throw in a cinnamon stick for garnish in your apple cider or a cute little umbrella for your watermelon drink!
Supplies: -large pumpkin -keg tapping kit -parchment paper -knife -big spoon/scooper Not pictured: -favorite fall drink -cinnamon sticks
STEP 1: Carve pumpkin To make my pumpkin keg, I first laid down a big piece of parchment paper on my work surface so my mess was contained. Then, I cut the top of my pumpkin open and scooped out all of the insides. I had a cookie sheet on standby to collect all of the insides because I wanted to save them for something special (see the end of the tutorial).
STEP 2: Create hole with carving tool In the keg tapping kit, they have this handy dandy hole carving tool. They recommend an optional first step of cutting the bottom of the pumpkin so that it sits flat but my pumpkin was already in good shape there, so I took the hole carving tool and inserted it into the side of the pumpkin where I wanted the tap to be. The instructions for the kit also recommend that you create the hole 2-3" from the bottom of the pumpkin.
STEP 3: Install shank Next, I took the shank apart, inserted the front part that the tap faucet would be attached to on the outside, then took the back part of the shank inside the pumpkin where my hole was carved, and connected the two parts by twisting until the shank was tight.
STEP 4: Attach faucet After the shank was installed, I ensured that the rubber seal was inserted in to the back of the faucet, then attached it to the face of the shank and tightened the faucet.
STEP 5: Add your favorite drink! Finally, it was time to add my family's favorite fall drink to our pumpkin keg. Our local grocery store sells a really good apple cider so I grabbed a half gallon and poured it straight into the pumpkin. *Note: make sure your faucet is in the "off" position--sitting straight up--or you'll have a mess on your hands!
Oh and of course I can't forget the last little detail... I always save the "guts" of my pumpkins when I carve them so I can make roasted pumpkin seeds. I clean all of the orange insides off of them using a strainer, lay the clean seeds out on a lined cookie sheet, drizzle them with a little EVOO and sprinkle with salt, then throw them in the oven at 300° for about 20 minutes. Makes for a great, healthy snack! *Note on the cost: the tap kit itself was $20, so once that investment is made, it's just a matter of just buying the fruit, drink and garnish of choice for your keg when you have events.
- Large pumpkin (grocery store)
- Keg tapping kit (Amazon)
- Parchment paper (on hand (from the grocery store))