Asked on Dec 23, 2016
How do I take apart a pallet wood board?
I have question... I have pallet, I need to take apart. Wood in great condition and I want to repurpose it. How do I take it all apart with least cracks/distress? Pallet is large, double layer, lots of nails, large wood slats. Thanks!
8 answers
-
Janet Pizaroon Dec 23, 2016www.wikihow.com/Take-Apart-a-Pallet-Without-Breaking itHelpfulReply
- Donnaon Apr 7, 2017this page was removedHelpfulReply
See 1 Previous - John Preeceon Dec 23, 2016if you have a recipricating saw with a metal cutting blade , just cut the nails and leave them in situ, very little damage and about 2 mins per nail.HelpfulReply
- Williamon Dec 23, 2016Janet's link is great advice! I either pry the boards off with a flat pry bar or cut the through the nails with a reciprocating saw. Don't want to waste any wood. Then I use a bear claw nail remover to get the nails out. I also have a hand held metal detector to find any hidden surprise metal. You can use a strong magnet.HelpfulReply
- Mcgypsy9on Dec 24, 2016If you want to keep most of the wood intact, you should get a crow bar or 2 of them actually works better. It's tough getting these things apart. With a LOT of patience you can do it and get most of it whole. If you have a recripricating saw or could borrow or rent one, this helps tremendously so that you can cut right through the nails but still pry it apart with the crow bars. The nails are much easier to get out once they are cut by using an awl or flat head screwdriver and a hammer and tapping them out of the wood. Good luck with this project! Let us know how it worked for you!HelpfulReply
- Philon Dec 24, 2016The best way to take it apart is by using a sawall I found it very easy. I take mine apart this wayHelpfulReply
- Missyon Dec 24, 2016This is great! ThanksHelpfulReply
- Missyon Dec 24, 2016Excellent!HelpfulReply
- Heather Edwardson Jan 15, 2017You tube has ideasHelpfulReply