Plastic Soda Bottle Heart

It’s two halves of one heart made from plastic soda bottles and it’s the perfect gift for a couple. NOTE: Many more photos are on our site post linked several times below!
SUPPLIES


⚫Two Clear Straight Sided 32 oz Soda Bottles


⚫Two small pieces of sturdy white poster board


⚫GOOP Glue or something similar. We tested hot glue but it just didn’t work well. You need a thick, clear glue of choice. GOOP worked great.


⚫ Wipe off marker


⚫Red paint for lids


⚫Template from our site.


⚫ Tag of choice below from our site.
⏩⏩⏩⏩CLICK HERE FOR THE FREE PATTERN DOWNLOAD⏪⏪⏪⏪
Wrap the pattern as it explains around each bottle and mark them.
This shows both bottles marked.
VERY CAREFULLY cut as straight as you can along each marked line.
Take two piece of stiff posterboard that will cover the bottom of each bottle.
Apply a thin line of thick, strong glue along the edge of your bottle where it was cut.
Press it down easily, so as not to stretch out the bottle, onto the cardboard and let it dry. Do the same for the other bottle.
Trim off the cardboard around the bottle once the glue has dried.
Spray paint your lids red.
Fill your bottles with candy of choice.
We suggest laying the bottles together in a container so they remain separate, especially if you are giving them to a couple.
⏩⏩⏩⏩CLICK HERE FOR THE FREE TAGS TO DOWNLOAD⏪⏪⏪⏪
Nancy at Craft Your Happiness
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
2 of 10 comments
Next