DIY IKea Lamp Paint Hack

Marilen Faustino Montenegro
by Marilen Faustino Montenegro
4 Materials
If you have stuff around the house that you no longer like, consider doing a paint hack. It can instantly turn your objects from boring to new. We bought this Ikea floor lamp in a dull grey color and I thought it would go well in my living room. As it turned out, it made things look dull. Situated beside our brown leather sofa, it was a boring sight. I thought of spray painting it to make it look more glamorous.

Here is what you will need:
  1. masking tape
  2. spray paint in your preferred color. I used matte black and metallic gold
  3. rag to dust the lamp off
  4. floor covering like old news papers
How to do it:
  1. Take the head apart from the body. Do this with parts of the lamp that you want in a different color.
  2. Tape other parts that are too close to something you want in a different color.
  3. Lay your newspapers to cover any surface you are working on.
  4. Start spraying one side and let it dry for about 3o minutes before doing the other side of your lamp if it is not accessible.
  5. Keep on spraying until you have the desired coverage and let dry between coats.
Assemble back together when completely dry

Some things I learned along the way:
  1. Remember how you took things apart so you can put them back correctly.
  2. Do your spray painting in an outdoor space so you don't inhale all the fumes, but pick a day that is not so windy.
  3. One spray can of each color is more than enough.
  4. Dust off the entire object before you spray paint to make sure you get an even effect.
Are you brave enough to try a hack like this? It wasn't so difficult, even if I did get some paint on my fingers. Because I did not have a big area to work on, I had to spray the lamp as it was laid horizontally on the ground. If you do it standing, it may take a shorter time to finish because you don't have to let surfaces dry between coats when lamp is standing. Let me know what you think!

Take the head apart from the body.  Do this with parts of the lamp that you want in a different color.
  1. Tape other parts that are too close to something you want in a different color. 
  2. Lay your newspapers to cover any surface you are working on.
  3. Start spraying one side and let it dry for about 3o minutes before doing the other side of your lamp if it is not accessible. 
  4. Keep on spraying until you have the desired coverage and let dry between coats. 
Assemble back together when completely dry 
Suggested materials:
  • Masking tape
  • Gold and matte balack spray paint can
  • News papers
See all materials
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
Next