Flower Boxes: Wood Working DIY Hanging Flower Boxes in My Master!

4 Materials
$10
2 Hours
Easy

This post is about how I built hanging flower boxes for my master bedroom! So this past winter I kinda went stir crazy with cabin fever. There really isn’t any explanation for it as we had an actually VERY short winter for us. But that doesn’t change the fact that I really did have a tough time personally. I just got so tired of the daily grind and the gray and the white and the never-seeing-the-sun and the every day being the same. Ugh. So, it occurred to me that maybe something green and growing in my master bedroom might just help brighten my winter days a little bit. So, I got to planning my flower boxes!

I decided to hang them because I have egress windows so I couldn’t put them on the sill where the crank handle is. At 27 inches wide I knew I could use 1x6s cut at that length and then a 1×4 in the bottom creating the depth. I gathered my materials and cut all of my pieces before assembling.

To assemble I used my brad nailer with my air compressor, you can use screws in this case but make sure and pre-drill before hand, anything that’s only the depth of a 1x will split. Once assembled I stained them with Minwax dark walnut stain and added some old wood to the fronts for character. Remember how that  old sink I used in the basement came in its original crate? Yup those two boards came off of that!

My next issue to deal with: How was I going to make these water tight? I looked all over for plastic inserts but none of them were the right size so I had to get creative: I caulked all of the inside seems (that is just a gray pure silicone caulk I had on hand) and then pressed a garbage bag into every corner and nook and crany and then cut off the excess. I then added even more caulk along the top edges (and that is just a clear pure silicone caulk that I also had on hand) to keep the garbage bag totally in place and let it dry over night.

To plant I added a second garbage bag (just to be sure we were TRULY water tight) and a layer of pine cones for both drainage and to help keep the weight down. From there I just used regular potting soil and planted.

I measured out from the edge of the window to the edge of the trim to center the hooks and make sure they were all the same distance out from the sides. The hooks I used I had on hand leftover from my mom’s chandelier. I did a little bit of pre drilling with a VERY small drill bit as I was having nightmares of these planters crashing down in the middle of the night SO they were VERY hard to screw in.

From there I purchased 50 feet of 3/8″ sisal rope from my local fleet store and it was just the job of cutting four pieces to length according to where I wanted the boxes to hang in the window. With them cut I tied a knot in them all at the same place and looped them over the hooks.

Oh now we come to the moment of a blogger facepalm, I was in such a rush to get these flower boxes built (and really excited too) that I forgot I had measured with the fact that I was going to put the sides/ends INSIDE of the walls of the boxes, just like I did with the bottoms. Yeah, so, I didn’t do that. So after all of that work I brought my now lovely (and fully planted and rather heavy) planters upstairs and they were 1/2 inch too wide. REALLY!?

So, as you can see, the planters with the sides/ends that I had finished and planted are missing those sides/ends in the after pictures of them hanging in the windows. It wasn’t a huge deal and only took me about ten minutes to fix but boy was I fed up with myself. So, I popped off the sides/ends (carefully peeling the caulk and garbage bag off of them) then cut them down, put them INSIDE the walls and bottom, tacked them into place with my brad nailer and then hauled the flower boxes back upstairs to finally loop them into the rope and call it a day.

Except for that little hiccup I sure am happy with them. I gave myself nearly two months to take the after photos and publish them here on the blog because I wanted the vines to have a chance to grow a little. In my head I imagine those vines spilling all the way down the window by next winter.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
GrandmasHouseDIY
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 34 questions
  • Dean Dean on Dec 01, 2020

    These are beautiful! I can't believe how easy you've made making them. I definitely am going to give this a try. They will be perfect for the windows in my sewing room.

    Also wanted to say I love the light fixture in the room where your planter boxes were hung. Did you make it too?

  • Merrill Merrill on Dec 01, 2020

    These are very nice, but how does this provide privacy in a bedroom?

  • Ann Ann on Jul 30, 2021

    I think your project is exellant, they look gorgeous and will bring you hours of pleasure. We'll done. 😊

Comments
Join the conversation
3 of 488 comments
  • Barbara Barbara on Feb 23, 2023

    Beautiful…. Yes we all need to brighten up our bedrooms or other rooms. I will definitely be trying your idea in my greenhouse, they will be great to hang from the ceiling out there. I love ivy like yours, it’s so easy to maintain. I’m into succulents these days. A new project for me. Keep doing these easy projects with us and share your ideas.

  • Lee Ann Dalrymple Lee Ann Dalrymple on Feb 27, 2023

    Oh I love this look so much!

Next