Designer Metallic Epoxy Dining Room, Entry and Bath

In this older home, the client was looking to update the old terrazzo floor that was cracked and worn. They were updating the bath and wanted the flooring to continue into the shower pan. We installed a designer metallic floor throughout and sealed with a high wear urethane.
The finished dining room floor done in metallic epoxy.
The original worn terrazzo in the dining area had been colored at some point.
There was heavy surface wear at the door and in other traffic areas.
The tub was removed and a low profile shower pan was built and sealed with a polyurethane.
Several coats of metallic epoxy were applied to the shower pan before a final top coat of urethane with an anti-slip additive.
The front entry after the new metallic epoxy floor was installed over the original terrazzo.
The hall and bath room with the final coat of designer metallic epoxy.
A dining room terrazzo floor is transformed with metallic epoxy.
To see more of what we're up to, you can follow us on Facebook here:
https://www.facebook.com/pages/Seattle-Surfaces/136664089711541?ref=hl

Questions on this post

Have a question about this project?

Your question...
  2 questions

Comments

Join the conversation

2 of 11 comments
Your comment...
Next