Kasey
Kasey
  • Hometalker
  • San Francisco, CA

How To Paint Laminate Cabinets

$100
2 Hours
Easy

The easiest way to give your kitchen, bathroom or bedroom a face lift is by painting your laminate cabinets. Whether your cabinets are starting to look worse for wear, or are the wrong color, some paint will fix it. Unlike wooden cabinets, laminate ones have a different painting procedure. So, before you pick up your paintbrush, here's a step-by-step guide on how to paint laminate cabinets.
Materials You’ll Need
Laminate cleaner
Laminate primer
Rubber gloves
Sanding block/sandpaper
Latex or oil-based paint
Paint brushes
Roller paint kit
Screwdriver
Painter’s tape

Step-By-Step Procedure
Always ensure that you protect your hands from harmful products while painting. You can do this by wearing rubber gloves.
 
1. Remove Visible Hardware
Use your screwdriver to remove all visible hardware. This includes any knobs, pulls and handles that you wouldn’t want the paint to get onto. You can then remove the cabinet doors which will allow you to paint the cabinet face more easily. This allows you to paint both the cabinet face and shelving thoroughly without the worry of messing on the rest of the cabinet. You can cover any non removable hardware with painter’s tape to protect it.
 
2. Clean The Laminate Surface
Use a cloth and a laminate cleaner to give all laminate surfaces a good wipe down. Give the surfaces an opportunity to dry before lightly sanding the laminate. This will allow the paint to better stick to the laminate surface. Once you’ve sanded the surface, sweep away any excess dust off the surface.
 
3. Prime The Laminate Surface
You can now use your paint brush and primer to paint close to the walls and along the cutting in (or edges). After you’ve painted these detailed areas, you can use your roller kit to paint the larger surfaces. Remember to keep drawers and doors still attached to the cabinet open so the paint doesn’t dry them shut.
 
Once the primer has dried properly, use a fine sandpaper to smooth the surface. You can do this by hand as it only needs a light sanding that won’t strip off half the primer. Follow this by dusting off the surface with a clean, dry paint brush before wiping it down with a damp cloth.
 
4. Apply The Top Coat
Before applying the top coat, give your chosen paint a stir. It is useful to pour half the paint into your working pot, and the other half into your paint tray. Like you did with the primer, you can now then paint the close to the walls and along the cutting in. And then use the roller to paint the larger surfaces. If you notice knocks and dents on the surface, consider a satin finish which will disguise these area. If not, you can use a full gloss paint.
 
Once the paint has dried, you can go ahead and replace all hardware that you’ve removed. You can then rehang the cabinet doors. For information on how to paint wooden cabinets, visit CabinetNow.com!

To see more: http://www.cabinetnow.com/

Have a question about this project?

Join the conversation

1 comment
  • William
    on Jul 12, 2017

    This is how I advise painting kitchen cabinets. Same procedure for painting anything. Cabinets, bookshelves, tables, etc.

    Make sure they are clean and dry. Use acrylic latex paint. Remove the doors and hardware. Mark the doors and cabinets with tape where they go. Lightly sand the doors and cabinets to remove any gloss and roughen the surface for paint. Prime with a stain blocking primer like Zinsser 123. Then paint with your color. Seal with at least three coats with a water based polyurethane. Use a small foam roller and foam brush for a smooth finish.
Your comment...