Build a base from the 2X4’s, construct a frame on a plywood surface, and stain.
Paint the basecoat of the ceiling in a dark green, and press a lighter green with a sponge for the marble look.
Begin by painting the wall gray, tape down the bricks to measure 4X8”, and apply compound.
Connect table legs with a Kreg Jig, wrap tabletop with metallic film, and glue wood into place.
Measure and cut down the PVC pipes to size, sand down the dowels, and install the anchors.
Roll on a basecoat, cover grip lines the color of your grout, and create several “squigglies” with black paint for the marble.
Clean down your floors first, and start unrolling the contact paper then trim off the excess.
Use acrylic paint to paint the base and use a feather to create the veining.
Mark down a 2X2 grid, paint the grout, and use a sponge to create detailing.
Use tape to cut the table into equal parts, paint bright pastels, and press on foil.