Will this faucet(the one not installed) work as a replacement?

And what am I missing or needing in order to make this diy mission a fruitful one?
q will this faucet the one not installed work as a replacement
This is under the sink and attached to the current faucet.
q will this faucet the one not installed work as a replacement
This is the one I was going to attempt to install.
  7 answers
  • Allison Allison on Jul 23, 2017
    I think that is a pot filler faucet, it will only give you one temp. Since the lever is an on/off only it won't work unless you only need either hot or cold. That's a strange setup you have there, I would be interested in seeing what type of faucet you have connected to it.
  • William William on Jul 23, 2017
    I agree with Allison. It definitely is a pot filler faucet. Won't work.
  • Nancy Turner Nancy Turner on Jul 23, 2017
    There are a lot of faucets now that have that kind of on/off knob. It should have come with directions on installing it and what parts are necessary to do the job right. If you don't have them, look up the brand, etc. on line for directions. We installed new kitchen sink, bathroom sink and tub faucets last winter and spring. Hubby new how to do it, but still needed the directions for any parts we would need that didn't come with it. He also checked the directions to see if there were any new twists to installation since the last ones we installed years ago.
  • Dan Hosfeld Dan Hosfeld on Jul 23, 2017
    I assume the three lines in picture one are the cold and hot coming in and the third is the sprayer line? Your replacement appears to have two inlet valves, although hard to tell in the picture, which would be for hot and cold. If there are two valves it would seem you can buy the extensions and hook it up to cold and hot lines yet there will be no sprayer. I believe the lever works both ways, to the left for hot and to the right for cold.
    • Jesse Stout Jesse Stout on Jul 24, 2017
      Thank you, and that's all kind of what I was thinking, but because the lines in appear like they won't fit directly, I was hoping that some kind of adapter for both water lines could be fixed to the faucet? Kind of like a T shape. Is that something that would work? I went to home depot today looking for help, but soon realized I had wasted my time.
  • Hillela G. Hillela G. on Jul 24, 2017
    Looks like its not the right fit, im sorry
  • Jesse Stout Jesse Stout on Jul 24, 2017
    Is there any kind of hot & cold adapter that would make this work? The opening on the new faucet won't fit the water lines directly because the opening isn't wide enough.
  • Gary B Gary B on Jul 24, 2017
    There is no adapter that will create another source. This faucet is for hot only or cold only. And a mixer valve will cost more than a new faucet
Your comment...