Use chalk to roughly outline the flower, apply Unicorn SPiT heavily in the center, and fan out with a tshirt.
Apply the wood surface with SPiT, spritz with water, press with plastic, use an oil based sealer, and add decals.
Strip the wood’s surface, sand down, draw the lily outline, and add stain lightly with a cloth.
Round out the edges of the table first, spread 4 different colors on the surface, and poly over the top.
Strip the gel off of the wood first, add pixie dust texture, then mix red and black Unicorn SPiT.
Tighten the bolts, repair the veneers, moisten the gel stain, and press a plastic tarp to spread the color.
Begin by stripping the top, block off sections with painter’s tape, and spread Unicorn SPiT on each section.
Prime the table’s surface, load the colors on in a spiral shaped pattern, and seal.
Purchase a thrifted table, highlight the edging of the table with gel stain, and redraw in your design.
Apply the Unicorn SPiT in a horizontal pattern, buff it with the grain, and apply polyurethane.