DIY \\ Jewelry Stand

Hassan Abu-Izmero
by Hassan Abu-Izmero
1 Material
$5
1 Hour
Easy
Hi Everyone! My name is Hasan, and I want to share with you how I made this jewelry stand. I'm really proud of it, so hope you enjoy.


Step 1: I began by taking a rusty piece of scrap metal that has the look of an old rake. Then I placed it in a clamp to hold it in place
Step 2: Using a metal rod I then bent the metal stakes to straighten them all. Make sure the clamp is on tight because lots of pressure is needed to get them in the right place!





Step 3: A sander was then used to shave off the rust and give the scrap a beautiful new metallic look!


Step 4: Using my wrench I removed two of the spokes, keeping them attached to one another.


Step 5: Out comes the pipe again to reshape the two pieces of metal that are fastened in to the clamp.
Step 6: Then heat the metal using a blowtorch to be able to weld the metal in to the perfect shape.
Step 7: Repeat the process for the second part of the original metal scrap. After it is prepared we are ready to weld the two pieces together!



Step 8: Time for the paint job... ;-)
Finished! Hope you enjoyed the way it came out! Hang you favorite pieces of jewelry and enjoy the unique design :)


Click the link below to watch the build video on YouTube!


https://www.youtube.com/watch?v=ezRb4sZ_GBI


Greets, HABU.
Suggested materials:
  • Clamp, scrap metal, sander, pliers, blow torch   (Scrapyard, hardware store)
Frequently asked questions
Have a question about this project?
  1 question
  • Mary Mary on Aug 31, 2017

    Love it! Is it too heavy to hang on a wall?

Comments
Join the conversation
2 of 42 comments
Next